Ore Flotation Plant includes crusher, ball mill, magnetic separator, flotation machine, thickener, dryer and conveyors etc.
High efficiency Ore Flotation Plant is mainly composed of jaw crusher, ball mill, classifier, megnetic separator, flotation machine, thickener, drier, feeder, and conveyor etc.
Advantages: high efficiency,low energy cost, high production capacity and economy and rationality.
Procedure of Complete Ore Flotation Plant: the ore is first sent to the jaw crusher for primary crushing.
Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and grouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic and mechanical force. Then the mixture is sent to flotation machine. According to the features of different ores, we can add different additive into the mixture to separate the ore which we want from the mixture. After the seperation from the mixture, the ore we want always contains a lot of water, then we need a thickner to have it concentrated and then dried by a drier, enventually we can get dry ore.
Advantages: high efficiency,low energy cost, high production capacity and economy and rationality.
Procedure of The Production Line: the ore is first sent to the jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and grouped mixture is sent to magnetic separator, due to the different susceptibility,
The chute feeder can be installed on the ground or onto discharge port of ore bin. The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore.
Jaw crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing.Introduction of jaw crusher: this series jaw crusher has the advantages of: big reduction ratio, equal product granularity, simple structure, reliable working condition, convenient repair and economical operation. Jaw crusher is widely used in the works of mine, smelting, building material, road, railway, irrigation, chemical industry, etc. the compression strength of the materials to be crushed is less than 320MPA.
The vibrating screen moves on a circular motion. So it is also called circular vibrating screen. It is a multi-layer and high efficient vibrating screen. Advantages are: stable structure, strong exciting force, high efficiency, easy to maintain and durability, handy maintenance and safety; circular vibrating screen has been widely used in mine, construction, transportation, energy and chemical industries. (Note: According to different demands of customers, our company can manufacture vibrating screen with different specifications and vibrating modes).
Electromagnetic vibrating feeder is a kind of linear direction feeding equipment. It makes a feature of smooth vibrating, reliable in operation, long service life and suitable for feeding. They are widely used in mining, building, silicate and chemical industries for crushing and screening.
Ball Mill:Ball Millis are mainly used to grind materials in mineral, cement, refractory, chemical industry, etc. Ball Mill has dry and wet ways. When wet Ball Mill works, certain water and other liquid will be added into materials to increase flowability of materials, so the capacity is increased. When dry Ball Mill works, capacity is affected because material flowability is reduced, so absorbing wind device is needed on the outlet of Ball Mill, and then negative pressure is formed in the Ball Mill to increase flowability of material, so the capacity is increased.
Spiral separator(Screw classifier):Wet Spiral Separators Spiral separators of the wet type, also called spiral concentrators, are devices to separate solid components in a slurry, based upon a combination of the solid particle density as well as the particle's hydrodynamic properties (e.g. drag). The device consists of a tower, around which is wound a sluice, from which slots or channels are placed in the base of the sluice to extract solid particles that have come out of suspension.
High-frequency screen consists of vibration exciter, ore pulp distributor, screen frame, machine frame, suspension springs and sieve, etc.
The Mixer rotaries by the V-belt drives the impeller, make medicine and mash mix even engough, increase the medicine effect time, strength the medicine effect quantity, necessity set. It fits concentrating, and every chemical industry mixing.
Floatation machine is applicable for the separation of nonferrous metal and ferrous metal and nonmetal, such as fluorite and talc.The impeller is driven by V-belts, which can bring the centrifugal effect to form the negative pressure. On the one hand, to inhale sufficient air to mix with ore pulp; on the other hand to stir ore pulp and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.
The High efficiency concentrator machine of our company is suitable for dehydrating water of the concentration and gangue in the concentrating factory, make the mash of 20-30% raise up to 40-70% about. It is widely used for melting, chemical, coal, non metal concentration, environment protected etc industry.
Dryer machine: Dryer machine are suitable for a wide variety of products, ranging from granular, powdered and crystalline materials, through to filter cakes and sludges for the food, chemical and mineral industries.
Application fields: Dryer machine is widely used in the field of building materials, metallurgies, chemical industry, cement and so on. It can dry slag, coal powder, mining powder, clay, sand, limestone and so on. It is made into rotary body, lifting blade, driving device, supporting device etc. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.
Excellent quality identified by all the Qualifications
We know what Hongxing gets from the society is more than her contributions to the society Hongxing cannot develop itself in isolation of the society Over the years,Hongxing's staffs have been grateful to the society,what thery can do is to regard product quality as company's life and innovation as object , dedicated to return society,put its strength for the indestrial and national development.
Green industry and internationalization is the strategic thought of Hongxing.Hongxing tries best to integrate the advanced technology,excellent talents and advanced concept into the company development,which give support to the pace,strategy and development of Hongxing's internalization and make our business partners using most suitable Hongxing's product .
high efficient and competitive price Complete Ore Flotation Plant flotation process flow made in Henan Hongxing Hot selling
