WELDING MACHINE NBC 250 GAS PROTECTION 1.Continious or Intermittent Welding Capacity. 2.Build-in or Separate Wire Feeder...
I. INVERTER NBC SERIES MIG/MAG/CO2 GAS PROTECTION WELDING EQUIPMENT WITH CCC&CE APPROVED
Model :NBC-200Y/250Y/250F
II.MAIN TECHNICAL PARAMETER
| MODEL ITEM | MIG/NBC-200Y | MIG/NBC-250Y | MIG/NBC-250F |
| INPUT POWER VOLTAGE FREQUENCY(V,HZ) | AC380(THREE PHASES)±15% 50/60 | AC380(THREE PHASES)±15% 50/60 | AC380(THREE PHASES)±15% 50/60 |
| RATED INPUT POWER CAPACITY (KWA) | 6 | 8.3 | 8.3 |
| OUTPUT CURRENT ADJUSTMENT RANGE (A) | 50-200 | 50-250 | 50-250 |
| OUTPUT VOLTAGE (V) | 16.5-24 | 16.5-26.5 | 16.5-26.5 |
| RATED DUTY CYCLE (%) | 60 | 60 | 60 |
| EFFICIENCY (%) | 85 | 85 | 85 |
| POWER FACTOR | 0.93 | 0.93 | 0.93 |
| INSULATION CLASS | F | F | F |
| TYPE OF WIRE FEEDER | INSIDE | INSIDE | OUTSIDE |
| OVERALL DIMENSION (MM) | 655x295x610 | 655x295x610 | 655x295x610 |
| PROTECTION CLASS OF CASE | IP21 | IP21 | IP21 |
| FEEDING SPEED (M/MIN) | 2.5-13 | 2.5-13 | 2.5-13 |
| POST-FLOVE TIME (S) | 1±0.5 | 1±0.5 | 1±0.5 |
| DIAMETER OF COIL (MM) | 270 | 270 | 270 |
| WEIGHT (KG) | 34 | 35 | 17.5 |
| DIAMETER OF EARTH CABLE (MM2) | ≥2.5 | ≥2.5 | ≥2.5 |
| WELDING THICKNESS (MM) | ≥0.8 | ≥0.8 | ≥0.8 |
| DIAMETER OF WELDING WIRE | 0.8/1.0 | 0.8/1.0 | 0.8/1.0 |
III.STANDARD ACCESSORY LIST&PICTURE
1. A set of welding torch.
2. A set of earth clamp with fast coupling device.
3.Two meters of gas carrying hose with two clips.
1.A set of welding torch.
2. A set of earth clamp with fast coupling device.
3.Ten meters of gas carrying hose with two clips.
4.Ten meters of 7x1 control wire with 7 core-plug.
5. Ten meters of welding cable with connectors.
6. A set of wire feeder.
IV.CHARACTERISTIC
1.Integrate wire feeder with power together.
2.Easy operation, high speed in welding without any interruption, high successfully Rate of arc-starting.
3.Little splash, deep welding pool,beautiful welding seam, heat-proof and Spilt-proof.
4.Suitable for mild steel, low carbon steel, alloy steel etc and suitable for welding the thin-palte(0.8MM).
WELDING MACHINE NBC 250 GAS PROTECTION
