Fuzhou Huixia Precision Instrument Co., Ltd. [China]

1. Complete function 2. High precision 3. Convenient operation and durability

1. Introduction of tool microscope 19C

Classify type of measuring instrument; 19JC nearly contains all measures of testing geometry. With complete function, high precision, convenient operation and durability, this instrument is normal equipment in precise machinery field, effective testing gist for measure & examination dept., and right hand of science research and teaching field.

Adopting grating subdivision and digital technology, 19JC has the characters of direct reading and good consistency, which greatly improves work efficiency and further enlarge use range.     

Universal Tool Microscope (Digital) 19JC is Projection universal tool microscope 19JA million improved significantly, the use of sub-gratings and digital technology, intuitive readings and consistency with good characteristics such as increased efficiency, to further expand the scope of the use.

Instrument Digital Interface data output table can be extended to connect two-dimensional data acquisition system and computer measurement of the operating system to upgrade its computer-based universal tool 19JPC microscope.

2. Main technical specification of universal tool microscope 19JC

Measuring range and division value     X-Y-coordinate

Measuring range 200×100mm   Division value 0.0005mm

Collimation microscope     Lifting distance: 120mm

Arm of force inclining range: both 15°left and right

Division value: 10′

Illumination grating adjusting range: φ3~φ32mm

Division value:1mm

Clinometers eyepiece Angle measuring range: 360°

Division value: 1′

Figure eyepiece   Angle measuring range: ±7°

Division value:10′

Circulate arc recircle   Curvature radius: R0.1~100mm

Screw recircle   Common screw distance t = 0.25 - 6

Trapezium screw distance t = 2 - 20mm

Optical indexing table Measuring range: 360° Division value:10″(projected value)

(Optional) Diameter of glass table φ106mm

Optical dividing head Measuring range: 360°Division value:1′

Optical localizer   Diameter of measuring headφ3±0.1mm

(Actual high-point diameter error can not more than 0.5μm.)

Measuring force   8 - 14g

Max. measuring depth 15mm

Glass worktable   Glass worktable dimension: 215×130mm

Thimble bracket   Max. clamping diameterφ100mm

Max. clamping length: diameter of tested part≤ 55mm, 750mm

diameter of tested part > 55mm, 600mm

High thimble bracket Max. clamping diameter: φ180mm

Max. Clamping length: 600mm

V-type bracket: Left V-type bracket front and behind adjusting range: Both 5mm front and behind.

Right V-type bracket upper and downward adjusting range: Upper 15mm / downward 3mm

Max. Carrying Capacity: 40kg

3. Optical parameter of collimation microscope

4. Instrument precision

Temperature requirement

(1) Workroom temperature should be 20 ± 2 °C.

(2)Workroom temperature change can not exceed 1 °C per hour.

(3)Tested part and instrument temperature difference can not exceed 0.5 °C.

In the condition of meeting all temperature requirements, the instrument has the following guarantee:

(1)X-Y-coordination: When using glass millimeter ruler to examine, the Max. Un-precision of the instrument is (1 + L / 100)μm. L: Measuring length. Unit is mm

 When the ruler corrects according to correction table, X-direction can not be more than 0.0035mm. Y-direction can not be more than 0.0025.

(2) Clinometers eyepiece: Max. un-precision: not more than 1′.

(3) Double-image eyepiece: Instability of imaging: not more than 0.0005mm

 Incorrectness of imaging: not more than 0.001mm.

(4)Optical dividing head: Max. un-precision: not more than 1′.

(5)Optical indexing table: Max. un-precision: not more than 30″ (optional).

(6)Optical graduator: Instability of measuring: not more than 0.001mm.

 Incorrectness of measuring: not more than 0.0015mm

5. Weight of instrument and overall dimension

Mainframe net weight: 250kg

Overall dimension: (L ×W × W):980 ×1020 ×640 mm

Universal tool microscope 19JC