1.Reliability, Energy savings,Safety,Convenience,Low noise,High efficiency, 2.Straight Wire Drawing Machine 3.High quality
Straight Wire Drawing Machine
Machine component
High pay-off+Surface treatment line+LZ-4/560+7/460 wire drawing machine+φ800 horizontal spool take-up
1. Surface treatment line:
Surface pre-treating line for wire rods is composed of mechanical husking with steel brush, Electrolytic Pickling, water washing tank, borax coating tank, baking tank.
Diameter of suitable wire rod: φ5.5~6.5mm., max. speed: 2m/second.
2. Straight wire drawing machine
Technical data of wire drawing machine
No. | Name | Unit | Technical data |
1 | Name of wire drawing machine | LZ-4/560+7/460 | |
2 | Way of drawing | Beeline tuning | |
3 | Number of block | 11 | |
4 | Diameter of block | mm | 4×φ560+7×φ460 |
5 | Way of speed regulation | AC frequency conversion timing | |
6 | Motor power | KW | 22+10×18.5 |
7 | Diameter of inlet wire rod | mm | Φ6.0 |
8 | Diameter of finished wire | mm | Φ1.5 |
9 | Average compression rate | % | ≤23% |
10 | Designed drawing speed | m/s | Max 15m/s |
11 | Way of control | Total digital | |
12 | Logical control | PLC | |
13 | Tension strength of inlet wire | MPa | 500 |
14 | Carbon content of wire rod | Low carbon steel | |
15 | Block cooling | Self-descaling with small narrow gap water-cooling plus circular wind cooling outside | |
16 | Die box | Water cooling directly | |
17 | Water cooling pressure | 0.2~0.3Mpa | |
18 | Pneumatic system | Air pressure≥0.5Mpa | |
19 | Time for stop | S | Normal stop ≤50s, emergence stop ≤5s |
20 | Way of pay-off | High pay-off | |
21 | Way of take-up | φ800 horizontal spool take-up | |
22 | Wire direction | Left to right |
3.Equipment characteristics
Reliability, Energy savings,Safety,Convenience,Low noise,High efficiency,appearance
Straight Wire Drawing Machine
