Detailed Product Description
Dryer:
During the process of drying,hot air is sprayed upwards and downward simultaneously to the material on conveyor belt,the spraying speed can be as high as 15m/s,so raw materials can be dried kuickly.the heat source of spraying airflow can be steam,electricity,coal-fired air heating furnace,fuel gas,or thermal oil furnace.
principle of work
During working hot air with slit flow or hole flow spray to material on conveyer belt at the same time down or up and down, spray speed can reach above 15m/s, so convection diathermanous heat transport film is very thin, heat transfer coefficient large, drying speed fast. during drying spray air stream use heating source can adopt steam, electricity, coal fuel hot air furnace, gas, oil, furnace etc.
| item ype | DWF1.2×10 | DWF1.6×10 | DWF2×10 | DWF2×20 | DWF2×40 |
| drying area m2 | 12 | 16 | 20 | 40 | 80 |
| L×W m | 1.2×10 | 1.6×10 | 2×10 | 2×20 | 2×40 |
| heat exchange area m2 | 230 | 330 | 400 | 800 | 1800 |
| temperature | 80-350 | ||||
| drying time h | 0.2-1.2 tunableness | ||||
| mesh belt rotate speed m/min | 0120m/min | ||||
| transmission power KW | 0.75kw | 0.75kw | 0.75kw | 5.5kw | 15kw |
| quantity of fan set | 2 | 2 | 2 | 4 | 8 |
| power of fan KW | 10.5kw | 10.5kw | 10.5kw | 30kw | 150kw |
| outside measurement L×W×H(m) | 12×1.5×3.6 | 12×1.8×3.6 | 12×2.2×3.6 | 22×2.2×3.6 | 43×2.3×3.8 |
