Cable making equipment copper wire making machine with annealing 1.inlet dia: 8.0mmoutlet dia:1.5mm 2.speed:25m/s 3.13 years
Cable making equipment copper wire making machine with annealing
LHD-11Dies automatic copper wire drawing machine with online annealing (factory)
specification:
Model | Suitable Material | Drawing Die | Inletwire Diameter (mm) | Outletwire Diameter Rang (mm) | Line Speed (m/s) | Capstan Diameter | Main Motor Power (kw) | Machine Dimension (m) | The Highest Yield (kg/h) | Machine Weight (kg) |
JD-450type heavya copper wire drawing machine | AL | 11 | 8.0 | 1.5-4.0mm | 22m/s | 450 | 250kw | 13*3* 3.5 | 1000kg | About 28T |
Take-up Configurations | Double take up machine | |||||||||
Main capability characteristic :
Features:
1.The drawing blocks rank in a horizontal row.And the cantilevers of all dies' holders are very short and in equal length.
2.The surface of drawing blocks is coated with tungsten carbide power. Which is strong in hardness and wear proof , having long life span.
3.Main drawing machine and dead -block are driven separately. And all dies can be changed conveniently and easily .
4.Continuous dual take up , automatic reel -change,the automatic reel -change can be done at more than 99% efficiency.
5. Driven by British Euro-DC converter,the imported PLC and touch screen .(Siemens or preface ,which is convenient for the operator to set and display the parameter on the touch screen )The bearing adopts Sweden
Electrical appliance using the German Schneider
Annealing machine :
1) structure: Horizontal
2) annealing: AC three section type
3): host drive through belt transmission
4) annealing maximum current:5000A
5) annealing maximum voltage:50V
6) annealing wheel diameter ( nominal diameter ):Φ 450mm
7) annealing rim material: cold rolled nickel belt
8) the intermediate idler pulley with LY12spray the surface of ceramic
9) consumption of compressed air: about 300L/min pressure over 0.8Mpa
10) heat exchanger in cooling water consumption: about 250L/min temperature is not higher than25 degrees
11) cooling water pump model: 80-65-160
12) heat exchanger (20 square meters )
13) bearing using NSK products
Double take-up machine:
structural characteristics:
A ) model into ring machine in structure more reasonable, in the drum and the rotary table does not occur between the wire clamping phenomenon;
B ) into ring machine drum spraying tungsten carbide wear-resistant materials
C ) using planetary belt wheel and a drum rotation, the wire frame deformation prevention requirements significantly;
D ) rolled off the claw elastic adopts pneumatic control
E ) wire line storage capacity
F) The pneumatic top of shaft Pneumatic lift
Copper rod breakdown machine production line scene photograph
Cable making equipment copper wire making machine with annealing
