Welcome to ECBAY
Hydraulic/Automatic upender for heavy metal coil
Hydraulic/Automatic upender for heavy metal coil

1.capacity of the machine Max 15MT 2.the width of the coil: 1500mm 3.hydraulic pressure system 0-10 MPa

Up-ender machine confidential in strict accordance with the "Up-ender operating rules" operation.

1, feeding operations will be forklift driver with by allowing the coil material and swell-shrink reel shaft center basic consistency, and then slowly put the steel coil forklift driver material on the car.2, the operator should rise or fall (hydraulic jack), the coil material to adjust to bilge shrink drum shaft center (namely: material can go in swell-shrink axis), this time the adjustment of decoiler top activities, the bearing decoiler keep in the same level.3, adjust the bilge nut make four pieces of bow type board, the swelling steel coil material, to avoid work roll material deformation and damage of steel.

4, when steel coil tightly expanded material, after hand turn uncoiler, observe whether material turn freely, avoid coming up in the work of various kinds of hidden trouble.

Main technical parameter

capacitycoil widthin-diameter
Max.5 Ton1250mm480~630mm
Max.10Ton1250mm480~630mm
Max. 15 Ton 1500 mm480-630mm

 

 

 hydraulic coil car // moving dolly   

Can be made in accordance with the need of customers , welcome to mail us for any questions !

Hydraulic/Automatic upender for heavy metal coil

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.