Slitting line machine is not only for the steel serivice cutting industry, but also for the pipe industry.
Introduction of the slitting line:
Slitting line machine is not only for the steel serivice cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.
Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, etc. It mainly used in coil or hot rolled carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.
This line can be adjusted to do recoiling or dividing work to meet customer’s demand.
Consist of the metal slitting machine:
1. Coil car
2. Decoiler
3. Peeler entry table
4. Straightener
5. Shearing machine
6. Loop table
7. Coil guide and pinch roll
8. Slitting machine
9. Scrap winder (both sides)
10. Loop table
11. Separator and tension table
12. Deflector roll and exit threading table
13. Recoiler
14. Over arm separator in the recoiler.
15. Exit coil car for recoiler
16. Hydraulic system
17. Pneumatic system
18. Electrical control system
Main technical parameters:
Material: cold and hot rolled steel coils;
Steel coil thickness: 0.7-6.0mm;
Steel coil width: 500-1600mm;
Steel coil I.D.: Φ508mm;
Steel coil O.D.: ≤Φ1800mm;
Steel strip weight: 20T Max;
Min steel strip width: 250mm
Slitting speed: 50 m/min
Width accuracy: ±0.2mm
Slitting burr: 6% of coil thickness
Side scrap width: 1.5-15mm
Slitting straightness error: 1.0mm/1000mm
WTM-(0.7-6.0)*1600 cold rolled steel coil slitting machine
