used cut to length line: 1.High degree of automation, simple&reliable operation 2.High cutting precision 3.good order stacki
Used cut to length line EHCL2*1600
EHCL series high-speed Cut-to-Length Lines employ a specialy designed crank guiliton shear. It runs non-stop. A servo motor roll feeder feeds the strip in pre-set length while the shear knives opens. In this working mode, a comparatively high shearing speed can be achieved. Like ECL Cut-to-Length lines, EHCL lines usually consist of entry coil car, uncoiler, leveller, servo feeder, shear, belt conveyor and stacker. Application in processing cold-rolled-steel, hot rolled carbon steel, silicon steel, tinplate, stainless steel and pre-paint etc.
EHCL-2X1600 high speed cut to length line's specifications are as below:
Input material: cold/ hot rolled steel,stainless steel,etc.
Coil thickness: 0.3-2mm
Coil width: 400-1600mm
Cut accuracy: ±0.3
Max uncoil speed: 60m/min
Max cut times: 80spm
Coil weight: 15tonUncoiling and Leveling Unit1. Feed automatically, operate easily.2. Hydraulic coiling roll is collapsible to protect inner.3. To uncoil tensity or to put the material manual to keep the material from leaning and the tender cover from scraping. 4. Choose double, quadruplex or sextuple rolls. The processing effect is well. Electronic Servo Feeder and Shear1. Feed rolls, driven by AC servo motor under the control of a digital control-system, precisely feed and meter the strip to the pre-set length.2. A mechanical high-speed continuous stroke shear is emplyed with EHCL cut-to-length line. With a frequency invertor drive, the shear is capable of 80-strokes/minute. The blades clearance can be adjusted conveniently by an eccentric mechanism in few seconds.Stacking unit1. Stacker is used in a CTL line to produce solid-block sheet packages.
2. A pair of "swing drap arms" are equiped on stacker for surface critical material prosessing, in which sheets are supported on a set of non-marking nylon rollers opened and closed by air cylinders to release the sheet directly above the stack.
3. A scisor type or screw jack type elevating table is under the stacker. It can automatically lowers as the sheet stack height builds-up.
4. A blower generates air cusion that helps support light gauge sheets in order to protect the surface from scraping.
5. Motor adjustable side skirts and back stop contain the sheet stacks and produce solid-block packages.
The paraments of other types of high speed cut to length line:
Cut Accuracy (mm)
Line speed Max (m/min)
Cut Speed Max (spm)
Coil Weight (ton)
Note:1. The line speed and the shearing accuracy are tested on plates with a length of 2000mm.2. The Maximum cutting speed is tested on plates with a length of 300mm.3. All the specifications and components listed here could be customized upon request.
As a Cut to length Line manufacturer and supplier in China, Eagle is able to offer you Cut to length Lines of different specifications. Our Cut to Length Lines are authorized by ISO9001 and CE certification. They are of low-cost and high quality. Apart from cut to length lines, we also offer slitting lines, flat bar cutting line, leveling machines, CNC drilling machines, etc. Please contact us, and we will supply you with high quality products at low prices!
Terms & Conditions:
1. PAYMENT TERMS: by TT
2. PRODUCTION TIME: 3-5 months after your order
3. PACKING: seaworthy packing
4. PRODUCT OF ORIGIN: P. R. China
5. PRODUCT GUARANTEE PERIOD: 12-15 months
Eagle has been engaged in the research and manufacture of CNC machines since 2003. As a professional rotary shear manufacturer, we are able to offer rotary shears of good quality, high cutting precision and cutting efficiency. Our rotary shears have obtained ISO9001 and CE certificates. They are exported to many countries in Europe and Southeast Asia. Apart from rotary shear, we also offer slitting lines, tension level lines, cut to length lines, etc. You are welcome to contact us!
used cut to length line EHCL Series