The equipment to produce the ductile iron pipe with dimensions of DN1200-2000mm, DN2000-2600mm, and length 6000-8000.
The introduction of the equipment
Hot mold method centrifugal casting machine is the equipment to produce the ductile iron pipe with dimensions of DN1200-2200mm, DN1200-2600mm, and length 6000-8000 with socket and spigot joint or flange type joint according to the regulations of ISO2531-1998(E) and GB/TI3295-2003. The equipment is low in cost, reliable in running , simple in operation, and is applicable to the production of large diameter casting pipes.
The composition of the equipment
Centrifugal pipe casting machine, pouring machine, pipe receiving and molding machine, paint spraying system ,cooling system, hydraulic system and electric control system, etc.
The main technical parameters of the equipment
The equipment dimension | Total installed capacity | Circulating cooling water consumption | The compressed air consumption | ||||||||
DN1200-2000 | 360 kw | 20-60 m3/h | 1.5m3/min | ||||||||
DN2000-2600 | 420 kw | 60-100 m3/h | 2 m3/min | ||||||||
Specification (DN) | 1200 | 1400 | 1500 | 1600 | 1800 | 2000 | 2200 | 2400 | 2600 | ||
Average output (piece/min) | 30-32 | 32-35 | 35-38 | 36-40 | 38-42 | 40-45 | 42-50 | 45-52 | 50-55 | ||
Hot mold method centrifugal casting machine
