Welcome to ECBAY
2012 cheap pre-tensioned anchorage in energy saving building
2012 cheap pre-tensioned anchorage in energy saving building

1.Type: Anchorage with 4holes 2.Size for pc strand:12.7mm,12.9mm,15.2mm,15.7mm 3.Use for: Bridge, building constructions

Application:

1.It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials.

 INSTRUCTIONS:

1 LQM anchorage must be used with LQM working wedge, and LQM tool anchorage must be used with LQM tool wedge.

2 Work anchorage can’t substitute for tool anchorage.

3 LQM series anchorage must be used with the same specification restraing plates of LQM.

4 Anchorage must be well keeped to prevent rusting and dirts . Before installation , rusting and dirts must be cleand to prevent from damaging the internal thread of wedge which will fill in the alveolar of wedge when tension.

5 When install anchorage, O Dia of Anchor Head should put in hole of Anchor Bearing Plate ,and the restraing plate must in the same direction with the hole of tool anchorage,and the strands cannot be twined around each other and dislocated.

  

2012 cheap pre-tensioned anchorage in energy saving building

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.