.Anti-static cleanroom swab .Good substitute for Texwipe swab. .Laundered in ISO class 4 cleanroom .Good ESD performance.
Shenzhen Cleanmo Technology Co., Ltd. has been actively engaged in the manufacture of Anti-static Cleanroom Swabs that are very good substitute for ITW Texwipe swabs .All the parameters tested and technical indicators that are in line with the requirement of the Hard Disk industry .They are free from silicone, amides or DOP and low in both particles and ion content. It is also used for cleaning with 99.7% electronic-grade IPA.
Cleanmo Cleanroom swabs are also good substitute for Huby swabs, which have following features: 1.The 100ppi open-cell polyurethane foam or polyester head have excellent absorbency and cleaning effect and thermal bonded to the handle 2.The polypropylene handle has favorable ESD performance and protects the sensitive components from damaging .And the handle do not generate any particles when used.
There are five different swabs: 1. Foam Head Anti-static Cleanroom Swabs. 2.Polyester Head Anti-static Cleanroom Swabs .3. Microfiber Anti-static Cleanroom Swabs . 4 .Optical Fiber Anti-static Cleanroom Swabs . 5 .IPA Swabs .
1.The foam swabs are constructed from compressed 100 ppi (Z) open-cell polyurethane foam that is free from organic contaminants such as silicone, amide or DOP. The pointed, non-abrasive foam head is designed for cleaning small, slotted and recessed areas, which exhibits low both particulate and ion content and shows strong compatibility with acetone or other solvents. Cleanroom swabs are laundered and packed under an ISO Class 4 Cleanroom with bag-within-a-bag. Besides, it is excellent in both absorbency and solvent-holding capacity. The ESD-safe polypropylene handle is very excellent in ESD performance. Such marvelous cleaning effect is controlled and supported by the flexible paddle head. The foam head swabs listed: CM-FS750 (TX750B), CM-FS750D (TX750D), CM-FS740 (TX740B), CM-FS740E (TX740E), CM-FS757 (TX757B), CM-FS742 (TX742B), CM-FS742G ,CM-FS741(TX741B), CM-FS751 (TX751B), CM-FS746 (TX746S), CM-FS712(TX712A), CM-FS706 (TX706A), CM-FS707 (TX707A), CM-FS707W, CM-FS708 (TX708A), CM-FS610 , CM-FS920 . CM-FS718, CM-FS719
2,Polyester Head Anti-static Cleanroom Swabs are constructed from compressed polyester head and polypropylene handle with excellent absorbency. They are also free from silicone, amide or DOP and laundered and packed under an ISO Class 4 Cleanroom with bag-within-a-bag. The polyester head thermal bonded to the handle.
The polyester swabs: CM-PS758L (TX758L), CM-PS758B (TX758B), CM-PS743 (TX743B), CM-PS714 (TX714A), and CM-PS761 (TX761). CM-PS761D (TX761D) CM-PS766, CM-PS767, CM-PS765
3,Microfiber Anti-static Cleanroom Swabs are also constructed from compressed, microfiber head and polypropylene handle with favorable absorbency. All features are same as the polyester swabs. There are two microfiber swabs:CM-PS715 and CM-PS714M
-Free from silicone, amide and DOP
-Low non-volatile residue
-Low in both particles and ion content
-Excellent solvent-holding capacity
-Compatible with most common solvents
-No contaminating adhesives or coatings
-Effectively clean small slotted. recessed areas
-Remove flux residue and excess material
-Use in the cleaning static sensitive components parts
-Used in the electronics, semiconductor, hard disk drive, LCD,PCB,SMT, IC, medical and biotech
For more information, please contact us at any time, we will try our best to serve you! Welcome to visit our website: www.cleanmo.com or http://cleanmo.en.alibaba.com
Anti-static Cleanroom Foam Swabs ( Good Substitute for Texwipe Swabs )