1.Material:Plastic,Nylon,Hdpe 2.Use:Grain Processing 3.Type:Deep/Low/No Bottom Bucket,Split/Rice Milling/Inductive Bucket
Plastic Elevator Bucket
1.Material: HDPE,Nylon
2.Use:Grain Processing, material handling3.Type:Deep/Low/No Bottom Bucket,Split/Rice Milling/Inductive Bucket
Type:
1.Deep Bottom Bucket
2.Low Profile Bucket
3.No Bottom Bucket
4.Split Bucket
5.Rice Milling Bucket
6.Inductive Bucket
7.Drying Bucket
8.D Series Bucket
Features:
1High intensity, wear-resistance, corrosion-proof, with longer life span than steel buckets.2Light weight, extend the life span of the bucket, reduce the energy consuming of the elevators.3Good pliability , low product damage percent of only 1.4No spark caused in operation, avoid the possibility of dust exploration.5Clean discharge, wide temperature applications.
Technical Index:
1Method of Manufacture : Injection molded.2Drilling: Free of charge. Special drilling is offered according to customers demand. (For detailed drilling specifications, pls refer to the related specification chart)3Bucket Spacing : Minimum bucket spacing has historically been nominal projection plus+50mm4Installation:Norway flat head elevator bolts, flanged bolt, sabre-tooth bolt, and belt bolt.5.Sanitary Standard: FDAapprovalnon toxic and no causticity itselt, suitable for food industry.
Physical and Chemical Properties of HDPE
ADensity: 0.9350.960 g/cm2BMechanical properties: Rupture strength: 900 N/cm2 Extensibility at break: 300%CCircumstance Temperature Range: -50+80 Heat-resisting Properties : Melting Point:136 Vicat Softening Point: 134 Brittle Temperature :≤-70 Coefficient of Heat Expansion : 1.5×10-14m/ Thermal Deformation Temperature : 85DFriction Properties : Average rate of Friction : ≤1.32 Coefficient of Friction : 0.080.12ESparks resulted form abnormal collision will not occur, nor does the electric discharge because of strong static electricity electrostatic charge caused by friction in the operation.Volume Resistivity : ≤7×1015Ω·cm
Physical and Chemical Properties of Nylon:
ADensity : 1.14g/cm2BMechanical Properties : Tensile Strength:82.7Mpa xtensibility at break : ≥300%CCircumstance Temperature Range : -40+105 Heat-resistance Properties : Melting Point: 255 Brittle Temperature : -80 Coefficient of Heat Expansion : 7×10-5m/ Thermal Deformation Temperature : 255 (0.5×106Pa)DVolume Resistivity : 1×1015g/cm2
PU buckets should not be used on the following:1.Materials over 1002.Large dense material such as gravel and ore over 3/8" diameter.
If you need specific product standard, please contact us at any time
HDPE Elevator Bucket
