1.Use: the taping production a variety of surface mounting devices (SMD) 2.Tape length is up to 120MM
Model: CF-10
·Use: the taping production a variety of surface mounting devices (SMD)
Capability and parameter:
·Flat blow molding, man-machine interface, easy and intuitive; automatic fault detection alarm system guarantees the normal operation of the equipments pneumatic components and servo motor lead screw are used;
·The performance is superior and stable; the secondary auxiliary molding depth can be up to 30MM (to be customized upon in excess of 30MM), parallel bars are used for the mold frame to locate, and X/Y axis is fine-tuned with micrometer, saving time to adjust the mold; automatically cut after setting the production quantity, to save labor and raw materials to the maximum extent. A carrier tape quality detector is loaded optionally.
Production process:
Automatically detect the emptying-warm-up-heat-mold-push (E value protection)-punch-tape-automatically detects the materials received-automatically cut after reaching the set value.
·Scope of set parameters:
·The heating time; blow molding time; auxiliary molding time;
·Tape speed; tape length; length in production
·The production of the applicable 12mm to 88mm carrier tapes
·Tape length is up to 120MM;
·The highest theoretical speed in production can be up to 450m/h(the speed of commissioning shield carrier tapes of our company reaches 380m/h).
Machine for carrier tape production
