ECOM VMC-1370 CNC Vertical Machining Center 1. High Precision; 2. Quality approval. 3. Technical Innovation 4. Best service.
1.ECOM VMC-1370 cnc vertical machining center (Box way) Specification:
Model | VMC-1370(E) | VMC-1370(G) | |
Travel | X-Axis Travel | 1300mm(51.2") | |
Y-Axis Travel | 700mm(27.6'') | ||
Z-Axis Travel | 620mm(24.4'') | ||
Spindle Center To Z-Rail | 705mm(27.8'') | ||
Table | Table Size | 1410*660mm(55.5''*26'') | |
T-Slot | 5*18mm*125mm(5*0.71''*5'') | ||
Maximum Table Load | 1200kg(2640lb) | ||
Spindle | Spindle Taper | BT-50 | BT-50 |
Spindle RPM | 6000rpm | 6000rpm | |
Type Of Driving | Belt | Gear Head | |
Feed Rate | X.Y Axis Rapid Feed Rate | 18m/min(708.7''/min) | |
Z Axis Rapid Feed Rate | 15m/min(590.6''/min) | ||
Three Axis Max.Cutting Feed Rate | 7m/mim(275.6''/min) | ||
Motors | Motors | Mitsubishi/Fanuc | |
Spindle Motors | 15kw | ||
Axis Servo Motor | 3.0kw | 3.0kw | |
Axis Servo Motor | 3.0kw | 3.0kw | |
Automatic tool Changer | Capacity of tool | Arm24T/Geneva16T | |
Change times | 4.5sec/8sec | ||
Machine Accuracy | Positioning Accuracy | ±0.005/300mm | |
Repeat Positioning Accuracy | ±0.003mm | ||
Other | Approximate Weight | 10700kg(23540lb) | |
Floor Space Measurement(L*W*H) | 3530*2670*2550mm(139''*105.1''*100.4'') | ||
Packaging Measurement | 3620*2770*2650mm (142.5"*109.1"*104.3") | ||
2.ECOM VMC-1370 cnc vertical machining center (Box way) Standard Accessories:
Mitsubishi Controller M70Leveling screws with blocksTool boxAir blast through spindleWork lampTwo color lightAuto power offAuto lubrication systemRigid tappingRS232 interfaceCF card interfaceRemote manual pulse generatorHeat exchanger for control cabinetCutting coolant unit Full splash guard3. ECOM VMC-1370 cnc vertical machining center (Box way) Features:
(1).The design principle of pyramid goldenratio structure and reinforcing rib ensures the cutting precision applicable
to all kinds of processing. The structure may bring good mechanical life and maturation effect stability and good damping result.
(2).Unique design of the base rail, saddle travel without hanging phenomenon, strong load, slide designed by
mining Zuo gauge high rigidity and high stability.
(3).Use Japanese technique scraping, and foreign professional technical cadres supervising operations.
(4).The hardened tripleaxle sliderail is treated with precise scraping and attaching TURCITEB wearresistant plates.. .
(5).Strong head design, head contact with the column and the column two rail tracks the distance between the best of the golden ratio,
and effective display of the machine rigidity.
(6).Lange humanshaped columns and four rails spoke of increasing width y axis design, matching the overall honeycomb-type casting structure, greatly improve processing of the firmware and seismic capacity.
(7). For gear spindle head or high,low 2step wide range electric area,BT50 hilt is more suitable for generally mold or
heavy cutting of product.
««THE WAY WE DO IS THE REASON YOU TRUST»»
♦Major structural components of the ECOM machine utilize MEEHANITE cast iron to provide maximum stability. All structural components are tempered and stress relieved. Major structural components are analyzed and designed using advanced finite element analysis (FEM).
♦The resulting parallelism and verticality of each ball screw is within +- .01mm (whole travel).
♦The spindle runs on super precision (angular contact) ball bearings to ward off vibration from heavy cut loads.
♦To ensure optimal quality and performance, the machine is inspected and tested before leaving the factory. This includes a strict quality inspection, laser detection, Ball Bar test, and actual cutting performance tests
(Heavy duty milling, 3D semi-circular cutting mold test, 45 degrees parallel to the 2D circular milling and cutting)
ECOM, YOU CAN RELY ON!!
VMC-1370 Vertical Machining Center
