3 Ton wheel loader -W136II with Cummins engine
optional engines,self-made high quality frames,bucket,arm,hood and cabin,strong axle and gearbox,with air condditionar
| Model: W136II | 3 ton wheel loader, with air conditioner |
| Basic Data | |
| Bucket Capacity | 1.8 or 2.2 m³ |
| Rated Load | 3200kg |
| Travelling Speed | |
| Forward 1st | 0-10.8km/h |
| Forward 2nd | 0-32.5km/h |
| Reverse 1st: | 0-14.5km/h |
| Max.Traction | 97kN |
| Max.Break Out Force | 100kN |
| Min.Turn Radius (outside tyre) | 5376mm |
| Max. Dumping Height | 3060mm |
| Max. Reach | 1008mm |
| Total Hydraulic Cycle Time | ≤10.3s |
| Full Bucket Lifting Time | ≤5.6s |
| Wheelbase | 2750mm |
| Tread | 1800mm |
| Dimensions (LxWxH) | 6970x2450x3228mm |
| Min. Clearance Over Ground | 360mm |
| Operating Weight | 11000kg |
| Diesel Engine | |
| Model | Cummins 6BT5.9 |
| Type | Direct injection, water cooling, 4 strokes |
| Rated Output | 97kW |
| Rated Speed | 2200rpm |
| Max. Torque | 560N.m |
| Transmission | |
| Model: | 5Ton transmission |
| Rated Input Speed: | 2200rpm |
| Transmission Type | 2 forward and 1 reverse gears, power shift, planet type |
| Mechanical Gear Ratios | |
| Gear I | 2.576 |
| Gear II | 0.691 |
| Reverse | 1.8846 |
| Hydraulic Oil Pressure | 1.10-1.40MPa |
| Torque Convertor Inlet Oil Pressure | 0.33-0.5MPa |
| Torque Convertor Outlet Oil Pressure | 0.1-0.20MPa |
| Lubricating Oil Pressure | 0.10-0.20MPa |
| Max.Permissible Temp. | 120°C |
| Transaxle & Tyre | |
| Transaxle Type | Fenyi |
| Drive System | 4 wheel drive |
| Rear Axle Oscillation | Center oscillation |
| Oscillating Angle of Rear Axle | 12° |
| Carrier Assembly Reduction Ratio | 4.375 |
| Rear Reducer Reduction Ratio | 4.75 |
| Tyre Size | 17.5-25 |
| Pressure Of Tyre | 0.28-0.32MPa |
| Working Hydraulic System | |
| Working Pump Type | Gear Pump |
| System Working Pressure | 16MPa |
| Lifting Cylinder Bore x Stroke | 125x816mm |
| Tilting Cylinder Bore x Stroke | 140x553 mm |
| Steering System | |
| Type | full hydraulic power steering system |
| Steering Pump Type | CBY2050 (reverse) |
| Max. Working Pressure | 10MPa |
| Steering Cylinder Bore x Stroke | 80x340mm |
| Max. Steering Angle | ±36º |
| Brake System | |
| Type | Air over hydraulic disc on four wheels brakes |
| Oil Injection Capacity | |
| Fuel Tank | 150L |
| Engine Oil | 15L |
| Transmission | 27L |
| Hydraulic Oil Tank | 140L |
| Transaxle | 30L |
3 Ton wheel loader -W136II with Cummins engine
