Welcome to ECBAY
UHZ series Antiseptic Magnetic Level Indicator
UHZ series Antiseptic Magnetic Level Indicator

Antiseptic Magnetic Level Gauge Range:300~6000mmTemperature:-40~350 C Pressure:0~32MPa Accuracy:10mm

Antiseptic Magnetic Level Gauge


l  Measuring Range: 300-4000mm

l  Accuracy: 10mm

l  Working Pressure:≤4.0MPa

l  Medium Temperature:-40-130 C

l  Medium Density : ≥0.5g/cm3

l  Medium Viscosity : ≤0.4Pa.S

l  Connecting:DN2025/50/80/150 PN1.0

l  Material of Wetted Parts: PTFE(teflon)

l  Material of Float: 316L ,PVC /UPVC/CPVC/PP , PTFE ,Titanium

l  External Diameter of Body Pipe(mm):Φ55Φ57 Φ 63


UHZ series Magnetic Level Gauge take float as measuring element. Magnetic steel drives column display, not requiring energy. UHZ is suitable for varies environment from Low to high temperature, from vacuum to high pressure, which is ideal level measuring instrument for Petrochemical Industry and etc.

We provide Side-Mounted and Top-Mounted according to installation site in the container.

We provide stainless steel, PP plastic, stainless steel lining teflon etc. according to medium. PP plastic and stainless steel lining teflon are ideal for acid and alkali corrosive medium.

 Structure Characteristic

 Basic Model

Float moves up and down with the elevation of level in the measuring tube, based on the principle of buoyancy. Permanent magnet steel in the float drives the red and white column roll over 180°by Magnetic Coupling effect. The column turns from white to red when the level rise, conversely, the column turns from red to white. Thus the level indication is realized.

Upper and Lower Limit Switch Output

The alarm switch on the set position of standpipe acts according to the magnetic float moving with the elevation of level. Thus it can realize ON-OFF control or alarm.

Electrical Remote Transmission

Transmitter is mounted on the magnetic level meter. The transmitter consists of sensor and transducer. It moves up and down the magnetic sub measurement measuring element followed by action role within the catheter by the magnetic coupling resistance signal change converts the standard 4 ~ 20mA current signal output, so that the digital display instrument or computer connection, Remote Display.

l  Main Technical Parameters




Installation Interval

Stainless Steel





Working Pressure



Medium Density




Stainless Steel







PP Plastic







Body Material

PP Plastic, Stainless Steel

Medium Temperature

-40~80°C 0~150°C 0~300°C

(PP Plastic -10~60°C)

Ambient Temperature


Indication Error


Medium Viscosity


Upper and Lower Limit Switch Output

Sensitivity Control:10mm

Output Contact Capacity:AC220V0.5A


Contact Life:50000

Electrical Remote Transmission Continuous Display


Output Load:4-20mA 0-500Ω

Signal Output:DC4-20mA,Two-wire system

Explosion-proof: iaⅡCT4 Intrinsically Safe

Note: 1. Side-Mounted: Stainless Steel: Measuring Range= Installation Space

PP: Indication Range= Installation Space L- 150mm

2. Installation Space (Measuring Range) Size: 500-5000mm (belonging to special orders design if longer than 5000mm)

UHZ series Antiseptic Magnetic Level Indicator

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.