Lathe Machine:
Swing over bed:410mm
Swing over cross slide:255mm
Swing in gap:580mm
Model | GH-6241M | Code No. | 101011 | CAPACITY | Swing over bed | 410mm(16) | Swing over cross slide | 255mm(10) | Swing in gap | 580(23) | Length of gap | 250(10) | Distance between centers | 1000mm(40) | Center height | 20.5 | Width of bed | 250(10) | HEADSTOCK | Spindle nose | D1-6 | Spindle bore | 52mm(2) | Taper of spindle bore | No.6Morse | Range of spindle speed | 16 changes 45-1800r/min | FEEDS AND THREADS | Max .travel of compound rest | 102mm(4) | Max.travel of cross slide | 210mm(8-1/4) | Leadscrew pitch | 4T.P.I. | Max.Section of tool | 20×20mm(13/16) | Longitudinal feeds range | 0.05-1.7mm/rev(0.002-0.067/rev) | Cross oeeds range | 0.025-0.85mm(0.001-0.0335/rev) | Metric threads range | 39kinds 0.2-14mm | Inch threads range | 45kinds 2-72T.P.I | Diametrical pitchesrange | 21kinds 44D.P. | Module pitches range | 18kinds 0.3-3.5M.P. | TAILSTOCK | Dia.of tailstock sleeve | 50mm(2) | Travel of tailstock sleeve | 120mm(4-3/4) | Morse taper of tailstock sleeve | No.4 Morse | Cross adjustock | ±13mm(±1/2) | MOTOR | Power of main motor | 2.8/3.3kw(3.8/4.5HP)3PH | Power of coolant pump | 0.1KW(1/8HP),3PH | DIMENSION AND WEIGHT | Overall dimension(L×W×H) mm | 1940×850×1300 | 1940×850×1320 | Packing size(L×W×H)mm | 2060×900×1640 | 2060×900×1640 | Net weight/Gross weight | 1500/1750 | 1550/1800 |
|
Lathe Machine:
STANDARD ACCESSORIES | u 200mm Three Jaw Chuck and Adapter u 320mm Four Jaw Chuck and Adapter u 300mm Face Plates u Steady Rest u Follow Rest u Thread Chasing Dial u Mt/6/4 Sleeve and MT 4 Center u Oil Gun u One set of Wrenches u Operation Manual |
| SPECIAL ACCESSORIES | u 200mm Driving plate u .Quick change Tool Post u .Taper Turning Attachment |
|
Gap Bed Lathe
