Welcome to ECBAY
Bench Lathe C0632A / C0636A Top X750mm X1000mm
Bench Lathe C0632A / C0636A Top X750mm X1000mm

Gapped bedways which are super-audio frequency hardened (HB450 plus)

Lathe C0632A Top Features This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan. This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling. It has high precision and long life. The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises.

ModelC0632Ax750C0632Ax1000C0636Ax750C0636Ax1000
Swing over bed330mm360mm
Swing over cross slide198mm212mm
Swing in gap diameter476mm491mm
Swing in length210mm210mm
Center height166mm166mm
Admits between750mm1000mm750mm1000mm
Bed width187mm187mm
Bed length1248mm1655mm1363mm1655mm
Bed height290mm290mm
Spindle bore38mm38mm
Spindle noseD1-4” or A2-4”D1-4” or A2-4”
Taper in noseNo. 5 morseNo. 5 morse
Taper in sleeveNo. 3 morseNo. 3 morse
Speeds number8 or 16 (pole changeable motor)(optional)8 or 16 (pole changeable motor)(optional)
Speeds range70-2000rpm or 35-2000rpm(2 speed motor)70-2000rpm or 35-2000rpm(2 speed motor)
Cross slide width118mm118mm
Cross slide travel160mm118mm
Compound rest width76mm76mm
Compound rest travel68mm68mm
Lead screw diameter22mm22mm
Lead screw thread8 TPI or 3 mm pitch8 TPI or 3 mm pitch
Feed rod diameter19mm19mm
Cutting tool max section16x16mm16x16mm
Threads imperial pitches36 Nos. 8-112 TPIor (34 Nos. 456 TPI)36 Nos. 8-112 TPI or(34 Nos. 456 TPI)
Threads metric pitches28 Nos. 0.2-5mm pitch or(26 Nos. 0.4-7mm pitch)28 Nos. 0.2-5mm pitch or(26 Nos. 0.4-7mm pitch)
Threads diametral pitches36 Nos. 8-112 D. P36 Nos. 8-112 D. P
Threads module pitches22 Nos. 0.2-3 M. P.22 Nos. 0.2-3 M. P.
Longitudinal feeds imperial36 Nos. 0.0019-0.0273” /Rev. or  (32 Nos. 0.002-0.548” /Rev)36 Nos. 0.0019-0.0273” /Rev. or(32 Nos. 0.002-0.548” /Rev)
Longitudinal feeds metric36 Nos. 0.050-0.696mm/Rev.or (32 Nos. 0.052-1.392mm/Rev)36 Nos. 0.050-0.696mm/Rev.or (32 Nos. 0.052-1.392mm/Rev)
Cross feeds imperial36 Nos. 0.0006-0.0094” /Rev.or (32 Nos. 0.0007-0.0187” /Rev)36 Nos. 0.0006-0.0094” /Rev.or (32 Nos. 0.0007-0.0187” /Rev)
Cross feeds metric36 Nos. 0.013-0.188mm/Rev.or (32 Nos. 0.014-0.380mm/Rev)36 Nos. 0.013-0.188mm/Rev.or (32 Nos. 0.014-0.380mm/Rev)
Quill diameter or optional32mm32mm
Quill travel or optional100mm100mm
Quill taper or optionalNo. 3 morseNo. 3 morse
Set over10mm10mm
For main motor2HP, 3PH or 2HP, 1PH2HP, 3PH or 2HP, 1PH

Bench Lathe C0632A / C0636A Top X750mm X1000mm

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.