100w 3d laser deep engraving machine
It is to meet the requirement of deep engraving for metal surface in vehicle, mechanics, electronics, metallurgy, petrol machine
Character
Key components are all imported from overseas, such as acousto-optic, Q-switch, lamp pump etc. Good quality of the system has been assured.Both long purls duration/high average power model and short duration/high peak power model.Based on the same electricity consumption, peak power from the machine is up to 300Kw, which is more than 10 times higher than traditional flash lamp-pumped solid-state lasers.Good beam quality & high energy conversion efficiency.Up to 0.08mm depth during single marking and maximum marking depth is more than 5mm.Pulse frequency control model, repeat frequency is 30KHz.Can be used for metal sheet drilling, minimum aperture width is 0.15mm.Engraving speed: 10 seconds/mm(die steel)Can do 3D engravingTechnical Parameters
| Model | CTDB-SD 100W |
| Laser Power | 100W |
| Laser Wavelength | 1064nm |
| Max laser head Up/Down | 50 cm |
| Frequency | ≤50KHz |
| Standard Marking Area | 110mmX110mm |
| Adjust Marking Area | 75mmX75mm /150mmX150mm |
| Marking Depth | ≤5mm(accrording to materals) |
| Marking Linear Speed | ≤7000mm/s |
| Minimum Linear Width | 0.015mm |
| Minimum Character | 0.3mm |
| Repeat Positioning Acuuracy | ±0.01mm |
| Max Peak power of laser | 300 W |
| Operating Voltage | 220V//50Hz/15A |
| Machinery Packing Size | 1100*1000*1200mm |
| Chiller Packing Size | 650*550*950mm |
Applicable industries
It is suitable for vehicle parts, hardware, stainless steel materials, watches and clocks, jewelry m industrial bearings, molds and so on. Especially for deep engraving on copper, aluminum, stainless steel and other metal material surface.
100w 3d laser deep engraving machine
