includes wireless handle and USB receiver 2.4G wireless transmission in connection also suitable for laptop game
DOSO PSW-303 is a Wireless Handle which includes a wireless handle and an associated USB receiver, designed specifically for the use with PSP handheld. The design concept of PSW-303 is to relief the fatigue that may have caused by long-time operation as well as to facilitate the TV connection with a wireless handle. In addition to the professional game handle design, PSW-303 also features functions of consecutive firing, auto code-checking, auto power saving and awakening and etc. By the use of 2.4G wireless transmission in connection with a TV set; you can make your PSP not only a handheld game console but also a desktop game console with a wireless handle.
Assuming that there is an appropriate Homebrew System Manager installed in your PSP then, you can either get the DOSO PWS-303 system driver “Handle V-3.0” ready from the CD disc attached or downloaded from the official site through the internet and then install the driver annexed to the directory of the PSP’ Flash Memory Card.
After the installation of the system driver, insert the USB receiver to the USB port of the PSP and plug in the power line to the USB receiver by using the power line splitter attached to complete the installation. Now you can play PSP games with the joyful experience of the wireless handle.
1. To install the system driver – Handle V-3.0
You can get the system driver ready by (a). from the CD disc attached; or (b). downloaded from the web site of www.dosopsp.com .
1-1. To install the driver from the CD disc attached
a). Plug your PSP or the Flash memory card of the PSP to a USB port of a PC
b). Insert the CD disc attached to the PC and execute the program inside the CD disc
c).Simply click the Handle V-3.1 shown on the screen and follow the operation instruction on the screen to complete the installation of seplugins..
1-2. To install the driver directly from the web site
a). After making your PC get in connected with the official website, plug your PSP or the Flash memory card of the PSP to any of the USB port of the PC, and then
b). install the driver according to the instructions manifested on the website to complete the installation of the driver.
c). DOSO official website: www.dosopsp.com
1-3. A special remark for the installation of the system driver Handle V-3.0
The wireless connection needs a code-checking process in prior to the operation. Although PSW-303 possesses function of auto code-checking, but due to the homebrew system manager installed in your PSP may differ from version to version, the malfunction of auto checking may happen while you switch on the PSP. In such a case, please try any of the following counter measurements to cope with the trouble that you may encountered;
1. In the case that the two LED indicators keep blinking after the PSP is switching on, please power the USB receiver off and on once again.
2. If trouble remains then, please make your PSP enter into any particular game that you preferred and after then, power the USB receiver off and on once again.
Generally the Driver of Handle V-3.0 would not overwrite any existed drivers in your PSP, in order to avoid any possible confliction in between drivers, please install all the drivers you needed before the installation of Handle V-3.0. In the case that the Handle V-3.0 was overwritten in any cause, please just re-install the Handle V-3.0 once again.
wireless controller for PSP