*New products *LCD digital display inverter *True sine wave inverter with charger 5kva/4.2kw *CE&ROHS&SGS *OEM/ODM
PSC LCD digital display high frequency pure sine wave Inverter 3000W-5000W WITH CHARGER is mainly used for solar power station; home solar power systems, mobile solar power system and DC wind solar generating systems.LCD Offgrid ture sine wave inverter with charger 5KVA/4.2KW
Main Features:1. LCD digital display will show voltage, frequency, battery and load information.2. Built in AC charger will charge batteries automatically.3. High-frequency switching technology for compact size and light weight4. Pure sine wave output (THD<3%) for wide range of applications and harsh environment5. High efficient DC-to-AC conversion minimizing energy loss6. N+X parallel redundancy framework design for future expansion7. "All master" dynamic mechanism eliminate single point failure to optimize reliability8. Low power "Power Saving Mode" to conserve energy for less than 15W9. High power density design 10. Input/output isolated design for the maximum operation safety11. Intelligent cooling fan speed control determined by loads12. Comprehensive status LED indicators13. DSP Control14. Multiple protection: Input low voltage / Overload / Short circuit / Low battery alarm / Input over voltage / over temperature15. Wall-Mount design for flexible placement
Main technical parameters
Inverter Mode SpecificationsMODEL | PSC5K-48 | PSC5K-96 |
Output Voltage Waveform | Pure Sine Wave | |
Rated Output Power(VA) | 5000 | |
Power Factor | 0.84 | |
Nominal Output Voltage(V) | 230Vac | |
Output Frequency(Hz) | 50Hz / 60Hz ± 1Hz | |
Output Voltage Regulation | ±10% rms | |
Nominal Efficiency | >90% | |
Over-Load Protection | fault after 5s@≥150% load, fault after 10s@110%~150% load, | |
Surge rating | 10000VA | |
Capable of starting electric motor | 2.5HP | |
Output Short Circuit Protection | Current limit (Fault after 4 cycles max) | |
Bypass Breaker Size | 40A | |
Nominal DC Input Voltage | 48V | 96V |
Min DC start voltage | 40V | 80V |
Low DC Alarm | 42.0 ± 1.2Vdc | 84.0± 2.4Vdc |
Low DC Alarm Recovery | 43.2 ± 1.2Vdc | 86.4± 2.4Vdc |
Low DC Shut-down | 40.0±1.2Vdc | 80.0±2.4Vdc |
Low DC Shut-down Recovery | 44.0±1.2Vdc | 88.0±2.4Vdc |
High DC Shut-down | 60.0±1.2Vdc | 120.0 ±2.4Vdc |
High DC Shut-down Recoveryµ | 58.0±1.2Vdc | 116.0 ±2.4Vdc |
Power saver setting | 0W (Set “OFF” at LCD) 10±5W enter 5+/-2w leave (Set “ON” at LCD) | |
Tare loss(nominal) | Saver OFF:<50w Saver ON:<10w | |
DC component of AC output | <100mv | |
Half wave load detection | Yes(when unbalance current>35A) | |
µ Note: Necessary condition for DC low recovery is: Line voltage must be available for charging.
Any doubts about this item,please contact Vicky for more infomation!
Solar power inverter with charger, DC to AC,LCD display,Pure sine wave,High frequency
