Welcome to ECBAY
[EYEN] modified sine wave inverter PG Series
[EYEN] modified sine wave inverter PG Series

1.OEM factory 2.Passed CE/ISO Cert 3.have trade with many countries 4.New product development ability

PG Modified Sine Wave Inverter

PG modified sine wave inverter is a combination of an inverter and a charge. It offers a smart, convenient and economic way to get AC power supply from DC source for most electrical equipment. When the AC input is available, it will switch to AC power supply and starts charging on the batteries.

 

Features1.With high frequency design and modified sine wave output, the modified sine wave inverter offers high efficiency. 2.Automatic switch between mains power and battery power supply. 3.Rack tower design, compact size for convenient use and storage4.Off mode charging function is available 5.Selectable switch for wider input voltage. 6.Full automatic and silent operation7.Built-in 10Amp super charger for up to 100Ah battery 8.Two-step intelligent charging control system is available to control recharging time. 9.The modified sine wave inverter comes with informative LED indicator and alarming functions. 10.Full protections against various abnormal situations11.Different AC outlet configurations are available: NEMA, Schuko, French, India, and BS136312.This is a small scale and cost effective modified pure sine wave inverter for home appliances and office equipment.

 

Technical Specifications

Model

PG 500

PG 1000

PG 2000

Capacity

VA/W

500VA / 300W

1000VA / 600W

2000VA / 1200W

Input

Phase

Single

Voltage

110 / 120VAC or 220 / 230 / 240VAC

Voltage Range

90 - 145VAC or 170-280VAC ( Narrow Range )

50-145VAC / 90-280VAC (Wide Range)

Output

Phase

Single

Voltage

120VAC or 230VAC

Voltage Regulation(Batt. Mode)

+10% ~ 18%

Frequency

50Hz or 60Hz

Frequency Regulation (Batt. Mode)

+/- 0.1 Hz

Output Waveform (Batt. Mode)

Modified Sine Wave

Power factor

P.F.

0.6

Battery

Charger Current

8 Amp + / - 1Amp

6 Amp + / - 1Amp

10 Amp + / - 1Amp

Floating Voltage

13.7V + / - 0.2V

27.4V + / - 0.4V

27.4V + / - 0.4V

Overcharge Protection

15V +/- 0.3V charger stops and fault

15V +/- 0.6V charger stops and fault

30V +/- 0.6V charger stops and fault

Transfer time

Typical

8ms

Efficiency

AC to AC

>95%

DC to AC

>80%

Indicator

AC Mode

Solid Green LED

Battery Mode

Solid Yellow LED

Battery Charging Mode

Green LED flashes at 2 seconds intervals

Overload

Red LED flashes at 0.5 second intervals

Fault

Solid Red LED

Audible alarm

Low Battery at Battery Mode

Beeps at 2 seconds intervals

Overload

Sounding at 0.5 second intervals

Fault

Beeps Continuously

Protection

Full Protection

Deep Discharge, Overcharge, and Overload protection

Physical

Dimension (L×W×H) mm

224 ×260 × 80

Net Weight (kgs)

1.7

1.9

2.5

Environment

Operating Environment

0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing)

Noise Level

Less than 50dB

Note Product specifications are subject to change without prior notice.

[EYEN] modified sine wave inverter PG Series

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.