1.latest converting technology 2. 400W, 600W,1000W 3. wave form: pure sine wave
1. The protection of overload: When many loads are connected to the inverter and the total power exceed 125% than the permitted loading power, the inverter will stop working automatically within 20 seconds. At the same time the red LED will get light, the inverter is in the state of protection. Until you reduce the load and restart the inverter, it will work normally.
2. The protection of short circuit: Same as the protection of overload.
3. The protection of thermal: Due to many loads, long working time or bad ventilation the temperature inside the inverter will be increased. When it is over 80, the red LED will get light and the inverter will stop working in the state of protection. Suggest you to reduce the loads, and improve the ventilation environment, then restart the inverter after the temperature fall to below 80.
4. The protection of low voltage: If the voltage of the battery de-escalates till the point of closing, the inverter give an alarm and stop working which indicate the battery is in the state of low voltage. Please close the inverter and charge the battery, then restart the inverter after battery is charged with enough voltage.
5. The protection of over voltage: When the battery voltage exceeds 16V, output will be cut off and the inverter stops working. When the input voltage is under 15V, the inverter will start to work automatically.
6. The protection of conversed connection: If the connection were conversed, the fuse will be burned. The inverter will work normally until you replace the burned fuse with new fuse. Although our inverter has the protection of conversed connection, users can not make the connection conversed on purpose because it is possible to cause bad effects on person or the equipment.
Technical Data
item product | IMP200P | IMP400P | IMP600P | IMP1000P |
Input Voltage | DC12V | |||
Input Current | 20A | 35A | 55A | 83A |
The wastage of empty load | ≤1A/12V | |||
Output Voltage | 220V±10 | |||
The wave shape of output voltage | pure sine wave | |||
Total harmonic distortion of output voltage | ≤1(full load) | 2(full load) | 2.5(full load) | ≤3(full load) |
Output Frequence | 50Hz±1Hz | |||
Efficiency | ≥85 | |||
Maximum output power | 200W | 400W | 600W | 1000W |
Instant starting power | ≤400W | ≤800W | ≤1200W | ≤2000W |
The protection power of overload | 300W/20s | 500W/20s | 700W/20s | 1100W/20s |
The protection of over voltage | ≥16V | |||
protection and comeback of low voltage | turn off for low Voltage≤10.5V, comeback automatically≥12.6V | |||
The protection temperature of over hot | 80 | |||
Physical characteristic | Net weight: 1Kg, Size:160×128×56mm | Net weight: 1.3Kg size: 200×128×56mm | Net weight: 1.6Kg, size :240×128×56mm | Net weight:1.8Kg, Size: 240×128×56mm |
Using condition:
0.1 The temperature of environment: -20~40
0.2 No electric and explosive dust and no metal corrosive or insulating gas.
0.3 Keep the power supply dry, ventilated and without any sundries, especially no combustible goods within one meter in order to cause fire.
IMP-1000 1000W 12V portable sine wave inverter
