PURE SINE WAVE INVERTER WITH CHARGER 1000W~ 6000W PSW7 TYPE It can use for family, ship and car.
PS W7 SERIES PURE SINE WAVE INVERTER WITH CHARGER
This equipment is suitable to use in family, and under special environments, the equipment can connect to perceptual load such as air conditioner, laser printer. Stability of this equipment is good, the charging current is big and the charge rate is also very high. The output wave for this equipment sine wave.
Features :
Pure sine wave output for connecting delicate inductive equipments, motor-based loads and wider connection applications.
Up to 70Amp charge current on 12Vdc models and 35Amp or 24Vdc models.
Selectable battery capacity with appropriate charging current to extend the battery lifetime.
Fast and automatic transfer from AC mode to inverter mode to continue the AC output power for connected load.
Overload, Battery low and high voltage Protection
High surge capacity up to three times of the self power rating
MODEL (Rated Output Power) | 1000w | 2000w | 3000w | 4000W | 5000w | 6000w | |
Input Voltage Waveform | Sinusoidal (utility or generator) | ||||||
Nominal Input Voltage | 230Vac | ||||||
Low Line Disconnect | 184Vac±4% | ||||||
High Line Disconnect | 253Vac±4% | ||||||
Max AC Input Voltage | 270Vrms | ||||||
Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | ||||||
Over-Load Protection (SMPS load) | Circuit breaker | ||||||
Output Short Circuit Protection | Circuit breaker | ||||||
Efficiency (Line Mode) | >95% | ||||||
Transfer Switch Rating | 30A | ||||||
Transfer Time (Ac to Dc) | 20ms (typical) | ||||||
Output Voltage Waveform | Sine wave | ||||||
Power Factor | 0~1.0 | ||||||
Nominal Output Voltage (V) | 230Vac | ||||||
Output Voltage Regulation | ±10% rms | ||||||
Nominal Efficiency | >80% | ||||||
Nominal DC Input Voltage | 12V | 12V | 12V | 24V | 24V | 24V | |
Nominal Charge Current | 70A | 70A | 70A | 35A | 35A | 35A | |
Charge Current Regulation | ± 5Adc | ||||||
Battery initial voltage | 0 –15.7 Vdc (can operate with 0V battery) | ||||||
Communication: | RJ11 (Used for factory testing. No customer interface available) | ||||||
Safety Certification | Compliance with UL458 | CE(EN60950) | |||||
EMI Classification | FCC, CLASS A | EN50091-2, CLASS A | |||||
Operating Temperature Range | 0°C to 40°C | ||||||
Storage temperature | -15ºC ~ 60ºC | ||||||
Operation humidity | 5% to 95% | ||||||
Audible Noise | 60dB max | ||||||
Cooling | Forced air, variable speed fan | ||||||
PURE SINE WAVE INVERTER WITH CHARGER
