Touch controller,4wire-Touch screen controller,ITO Touch Screen controller,Touch Panel controller-TouchKit Manufactures
touch screen controller Hardware Specifications Power Requirements +5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple) Operating Temperature 0 to 50 degrees Centigrade Storage Temperature -40 to 80 degrees Centigrade Relative Humidity 95% at 60 degrees Centigrade Protocol 1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit2. USB: USB 1.1 Low speed3. PS2: PS2 mouse Resolution 2048 x 2048 Accuracy Tolerance Max. +/- 0.5% tolerance Report Rate 1. RS232: Max. 160 points/sec2. USB: Max. 160 points/sec3. PS2: Max. 140 points/sec Response Time Max. 35 ms Regulatory Approvals FCC-B, CE Pin Out Definition X+Ref, Y+Ref, X-Ref, Y-Ref, X+, Y+, X-, Y- Panel Resistance 200 ~ 900 ohm (pin to pin on the same layer) Software Features Calibration Fast Full oriental 4 points position Compensation 1. Accuracy 25 points linearity position2. Edge compensation Draw Test Position and linearity verification Controller Setting 1. Support multiple controllers2. Dynamical add/ remove controllers3. Change controller interface without reboot Languages Support 10 languages for Windows Mouse Emulator 1. Right/ left button emulation2. Click/ drawing mode Sound Notification 1. No sound2. Touch down3. Touch up Double Click 1. Configurable double click speed2. Configurable double click area OS Support 1. Windows 95/ 98/ ME/ NT4/ 2000/ XP/ XP Tablet PC edition 2. Windows CE 2.12/ 3.0/ .net/ 5.0 3. Linux (up to Kernel 2.6) 4. MS-DOS: support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024 5. iMac 9.0/ OS X COM Port Support 1. Support COM1~COM256 for Windows and Linux2. Support COM1~COM8 for DOS Display Support 1. Support monitor/ display rotation2. Support multiple monitors3. Support split monitor
Touch Controller(8 wire RS232)
