Accelerometer Vibration sensor Acceleration sensor Acceleration transducer vibration transducer Product introduction
Built-in IEPE circuit, isolating output, constant flow source power supply.
Laser seal welded.
Using M12 connector, the connection plug of M12 is screw pressure connecting which doesn’t need to weld, it can be used for the industrial on-line monitoring with big difficulty of on-site welding.
Technical parameterParameter | Index | Remarks |
Sensitivity(±10%) | 100mv/g |
|
Acceleration Range | 50g |
|
Amplitude Linearity | 1% |
|
Frequency Range | 0.5~10KHz |
|
Resonance Frequency | 22KHz |
|
Transverse Sensitivity | ≤5% |
|
Mount screw thread | 6mm |
|
Bias Voltage | 10-12VDC |
|
Constant Current | 2-20mA,Typical 4mA |
|
Voltage Excitation | 18-30VDC, Typical 24VDC |
|
Output Impedance | <150Ω |
|
Casting Dielectric Resistance | >108 Ω |
|
Maximum Shock Level | 5000g |
|
Weight | 84g |
|
Dimensions | Diameter×Height 23×48(mm) |
|
Sealing Arrangements | Laser welding |
|
Transducer Composition | Shear |
|
Casting Material | Stainless Steel |
|
Output Mode | Top Output,M12 |
|
Temperature Range | -40~+120°C |
|
Mount Torque | About 2.7~6.8N.m (M6) |
|
Anti-explosion options | ||
Anti-explosion identification | ExiaIICT4 | Used for 0 Area, 1 Area, 2 Area |
Temperature Measuring options(not standard configuration, optional) | ||
Measurement Range | 0~120°C |
|
Sensitivity | 10mv/°C |
|
Acceleration transducer
