power supply for laser cutting bed can be used on most of laser machine Power supply for CO2 laser tubes 150W laser power
Specification of 150W power supply for CO2 laser tube, laser power supply, power supply
Input | Input Voltage | AC220V or AC110Vto be specified when placing order | |
AC frequency | 47440HZ | ||
Cold Surge Current | ≤60A(AC220V Input) | ≤30A(AC110 Input) | |
Current Leakage | ≤0.7MAAC220V Input | ≤0.4MA(AC110V Input) | |
Output | Maximum Input Voltage | DC 50KV | |
Maximum Output Current | DC 38MA | ||
Efficiency | ≥90full load | ||
Mean Time Between Failure (MTBF) | ≥1000H | ||
Response Speed | ≤1msfrom the switch Signal is given to the output current up to 90% of the setting current | ||
Control Interface | TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) | ||
Withstand Voltage | Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. | ||
Protection | can work in open-circuit condition for a short timeRequire a good protective earthing and avoid arc between the positive and the machine shell | ||
Environment | Operating Temperature-10~40,Relative Humidity (RH)≤90 | ||
Cooling Way | Force-Air Cooling (FAC) | ||
Dimension | L×W×H=325*240*95(mm) | ||
If you need the details of the following content, please Emial to obtain.
laser power supply for CO2 laser tubes 150W
