Safe, environmentally friendly, Intelligent, economic. Applicable to cars, microbus, vans, freight vehicles, coaches, etc.
Hydronic Parking Heaters (5KW)
Technical Specifications | ||
Thermal Power (W) | 5000 | |
Fuel | Gas | Diesel |
Rated Voltage (V) | 12/24 | 12/24 |
Fuel Consumption(1/h) | 0.2-0.5 | |
Rated Power (W) | 22-50 | |
Lowest Working Temperature (° C) | -40 | |
Weight (kg) | 2.7 | |
Dimensions (mm) | 250× 160× 90 | |
This parking heater is a set independent fuel heating system, via high-tech intelligent control, you can preheat car engine and cab without starting engine, reduce the abrasion to engine due to cold starting, prolong the working life of engine, and make a comfortable driving space. Even though the outside temperature is minus 40 degree centigrade, the driving cab is very warm and comfortable. 1. Advantages A) Preheating for the engine and compartment without starting the engine B) Avoid attrition to engine on cold starting at low temperature. C) Resove the problem of removing frost, snow and fog and save time D) Compact structure, easy installation. Convenience maintenance, It can be dismantled and installed to another vehicle according to your requirement. E) When your vehicle stop and wait, you can close the engine and start the parking heater, this will save 90% fuel. 2. Principle of operation: The heater is connected between the car engine and warm fan water tank. When the heater is working, the cooling liquid of the engine will be circularly heated through the heater furnace cavity. In such way, the temperature of engine, warm blower, water tank and cabin will gradually increased. 3. Control mode Timer Control Install on the panel. You can set up the auto-start/off time, or control with on-off key ook 4. Applicable scope Applicable to all kinds of car, microbus, light-van, minibus, etc.
12V gasoline engine preheater (Timer control)
