Industrial Heater HG 140 Series 1, Dynamic heating up 2, Energy saving 3, Wide voltage range 4, Temperature Limiting
2012 New Industrial Heater HG140 Series 45W Heating Capacity
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value.
The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation.
Pressure clamb connectors save time and simplify installation.
120-240V AC/DC* (min. 110V, max. 265V)
PTC resistor, temperature limiting
extruded aluminium profile, anodised
3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm²
plastic according to UL94 V-0, black
clip for 35mm DIN rail, EN 60715
vertical airflow (air outlet up, connection on bottom)
-45 to +70 °C (-49 to +158 °F)
Operating / Storage humidity
max. 90 % RH (non-condensing)
Protection type/Protection class
IP20 / I (earthed)
VDE + UL File No. E150057
screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Inrush current max.
Pre-fuse T (time-delay)
*at 20°C (68°F) ambient temperature
2012 New Industrial Heater HG140 Series 45W