Welcome to ECBAY
Semiconductor Fan Heater CR 027
Semiconductor Fan Heater CR 027

These small heaters are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

Semiconductor fan heaters prevent the formation of condensation and ensure an even temperature in switch and control equipment. The built-in regulator is used to set the desired temperature.

Technical Data

Heating elementPTC resistor, temperature limiting
Temperature safety cut-outto protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearingAirflow see table
 service life 50,000h at 25°C (77°F)
Connection2-pole clamp 2.5mm², clamping torque 0.8Nm max
Casingplastic according to UL94 V-0, light grey
Optical indicatorthermostat control lamp
Connection2-pole clamp 2.5mm², clamping torque 0.8Nm max.
Mountingclip for 35mm DIN rail, EN 60715
Fitting positionvertical airflow (air outlet up) other fitting positions possible
Dimensions100 x 128 x 165mm
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
Operating / Storage humiditymax. 90 % RH (non-condensing)
Protection type/Protection classIP20 / II (double insulated)
ApprovalsUL File No. E204590

Art. No.Operating voltageHeating capacity (50Hz)*Heating capacity (60Hz)*Inrush current max.Pre-fuse T (time-delay)Airflow, free flowSetting range Temperature regulatorWeight (approx.)
02700.0-00220-240VAC, 50/60Hz475W550W11.0A6.3A35m³/h0 to +60°C0.9kg
02701.0-00220-240VAC, 50/60Hz550W650W13.0A8A45m³/h0 to +60°C1.1kg
02700.9-00100-120VAC, 50/60Hz400W550W14.0A8A35m³/h+32 to +140°F0.9kg
02701.9-00100-120VAC, 50/60Hz510W650W15.0A8A45m³/h+32 to +140°F1.1kg
*at 20°C (68°F) ambient temperature        

Semiconductor Fan Heater CR 027

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.