1.Continuous annealing furnace have high production 2.it can save labour,reduce pollution etc. 3.The consume energy is oil.
heat treatment Bright Annealing oil Furnace
This furnace energy is oil , the oil comsumption is around 35kg/t , the ammonia consumption is around 5kg/ T, the electrial is 55kw/T .
The pre-heating lenth is 5 meters , heating zone length is 12 meters , the cooling length is 7 meter .
Steel:a series of stainless steel 200,300,400 strip
Representative steel: 201.304.430
Size : 0.4-2.0(thickness)*650mm
Coil inside diameter:diemater 508mm
Coil outside diameter:Max.diemater 1800mm
Coil weight:Max. 10 Tons
1.3.2 Finish product specification
Size : 0.4-2.0(thickness)* 650mm
Coil inside diameter:diameter 508mm
Coil outside diameter:Max.diameter1800mm
Coil weight:Max.10 Tons
1.3.3 Furnace type:Muff tube horizontal continuous annealing furnace
1.3.4 Technical parameters
processing material:series of stainless steel 200,300,400
Heat treatment furnace rated temperature : 1100°C
Temperature control precision:±2°C
Length of heating zone :32 m (include 8 m pre-heating section)
Muffle Size : 11800mm×750mm×450mm×8mm(T)×2PCS
8200mm×750mm×350mm×6mm(T)
Hearing method : oil
The coil running speed : 3-35m/min.
Tention force for each section :
Decoiler:5-10 N/mm2
Furnace innerl : 4-7N/mm2
Recoiler : 10-20 N/mm2
Production : Max.=2300kg/h,55000kg/24h(Based on 201 stainless steel,1.0*750mm,HV<210>)
Oil Consumption: less than 36kg/T ( per kg heat value below 9800 kilocalorie)
Ammonia Consumption:less than 3.6kg/T
Production : Max.=2700kg/h,64800kg/24h(Based on 201 stainless steel,1.0*750mm,HV<240>)
Oil Consumption : less than 34kg/T ( per kg heat value below 9800 kilocalorie)
Ammonia Consumption:less than 3.4kg/T
Equipment length : less than 62m
Euipment Length:less than69m ( with looper pit )
Unit production ability : TV=7.5
Annual production capacity :20000T/year--23000T/year
2..The furnace structure:
It include sealing device,heating section,slow cooling section ,cooling section,output sealing device and furnace roller etc.
Intel sealing device
Upper and down steel plate press together,there is nitrogen crack in seal part to prevent the furnace exit getting fire,the protection gas of inside the furnace drain out to outside by special pipes before into the sealing device.
Heating section furnace body is made by steel plate and steel column,inside with Hi-aluminum and fibre felt,upside of the furnace adopting Hi-aluminum fibre hanging,The pre-heating muffle length is 8.2m×0.75m×0.35m( thickness is 6mm, 310S )
The heating muffle length is 11.8m×0.75m×0.45m( thickness is 8mm, Sweden310S )
Single wall of furnace thickness is 550mm, 230mm is brick,another 320mm is high aluminium heat preservation cotton.
The top part of the furnace cover is a whole structure part, so easy to replace the muff pipe, life time is around 10 years.
The furnace shell temperature wont exceed 70°C .
2.3.1 Slow cooling section :
It mount a graphite roller inside ,so it can support the furnace coil with the input roller together .
The dimention is 500*1100*450*8mm
heat treatment Bright Annealing oil Furnace