Semiconductor Heater

Semiconductor Heater

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.

Technical Data

Operating voltageHeating elementHeater bodyConnectionConnection casingMountingFitting positionOperating/Storage temperatureOperating / Storage humidityProtection type/Protection classApprovalsAccessoires

120-240V AC/DC* (min. 110V, max. 265V)

PTC resistor, temperature limiting

extruded aluminium profile, anodised

3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm²

plastic according to UL94 V-0, black

clip for 35mm DIN rail, EN 60715

vertical airflow (air outlet up, connection on bottom)

-45 to +70 °C (-49 to +158 °F)

max. 90 % RH (non-condensing)

IP20 / I (earthed)

VDE + UL File No. E150057

screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)

*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Art. No.Heating capacity* Inrush current max. Pre-fuse T (time-delay) Length (L)14000.0-0015W 1.5A 1A 65mm14001.0-0030W 3.0A 2.5A 65mm14003.0-0045W 3.5A 2.5A 65mm14005.0-0060W 2.5A 2.5A 140mm14006.0-0075W 4.0A 4A 140mm14007.0-00100W 4.5A 4A 140mm14008.0-00150W 9.0A 6.3A 220mm

Weight (approx.)

0.3kg

0.3kg

0.3kg

0.4kg

0.5kg

0.5kg

0.7kg

*at 20°C (68°F) ambient temperature

Semiconductor Heater