All in one heat pump

OVERVIEW

The All in one  is a heat pump with coils-lined hot water storage tank. The heat pump recovers energy from the ventilation air. The recovered energy is supplied to the hot water  via the built-in condenser coil. The heat pump must be installed in a ventilation system intended for mechanical exhaust air. The rating of the immersion heater is 2 kW. The pressure vessel of the All in one  is approved for max 9.0 bar (0.9 MPa). When the room-temperature exhaust air passes through theevaporator, the refrigerant evaporates because of its low boiling point. When this happens, the room air gives off heat  to the refrigerant.The refrigerant is then compressed in a compressor, causing the temperature to rise sharply. The hot refrigerant is fed to the condenser(Plate exchang-er), Here the refrigerant gives off its heat to the hot water,  whereupon the temperature of the refrigerant drops and it changes from a vapour to a liquid. The refrigerant then passes via a moisture filter to the electric expansion valve, where the pressure and temperature are further reduced. The refrigerant has now completed its circulation and passes through the evaporator again.

FEATURES

1.The ALL IN ONE double source DC inverter  heat pumps offer the utmost in versatility in solving your cooling and heating needs. By utilizing environmentally friendly R-410a refrigerant and DC Inverter technology, the unit automatically adjusts its performance to meet the changing needs of the space while maintaining the desired temperature. This leads to increased efficiencies, low energy consumption and a very comfortable environment

2. Air source+Solar source  is a perfect choice to deliver superb performance in a limited space format. In fact, it is suitable for a variety of applications such as condos, offices, restaurants, sunrooms and mobile homes. With several models to choose from, this solar assisted ductless system provides a SEER rating of up to 28 and EER of up to 16.5. Its COP is up to 6.2. The performance of ALL IN ONE system has been rated under tested air+solar conditions, and it varies depending on certain factors such as temperature, solar condition and wind speed as well as direction.

3.The DC inverter compressor  can work between 15Hz and 105Hz Cooling or heating  your House according your requirement. Saving more energy!  Still works and heats when the outside temperature falls down to -25ºC.

4.The unit's  Controller with an easy to read LCD Display, gives the user the capability to adjust & set: temperature, operation mode , timer, Running parameter checking ,fault diagnosis,night setback and more, for complete automatic operation.

5. Automatic heating and cooling changeover: After setting the temperature and functions you desire, just relax. If the room temperature is higher than the set temperature, cooling operation or water tank heating begins. If the room temperature is lower than the set temperature, heating operation begins. During normal thermostat cycle operation, cooling and heating operations automatically change in accordance with set temperature, time and room temperature.

6. Automatic solar system control function: After setting the temperature and functions you desire. When the solar water temperature is higher than the set water tank temperature or room temperature , the solar circulate pump will be started. If the solar temperature is lower than the set temperature ,the solar pump will be turned o

Nominal* Output data at 20 (12) / 35 ° C and 20 (12) / 50 ° C is defined according toEuropean Standard EN255 without fans and pumps. The indicated temperatures 20° C indicates the indoor air temperature and (12) ° C indicate wet air temperature.** Aternativt 6.0 or 9.0 kWSound pressure level measured at 1m from the unit