This Titanium Pool Heat Exchanger have higher heating efficient on corrugated inner tubes with high flow rate inside of unit
1. Material: Full titanium (full stainless steel 316L)
2. Tubes: spiral twisted tubes
3. Connectors: BSPT thread or NPT thread
4. Design pressure: 1.31MPa5. Design temperature: 208C
5. Surface: polished
6. Mounting bracket is available
7. Special design for boiler or solar water pool heating system.
8. Packing: carton with wooden case.
Advantages:
1. Increase heat transfer efficiency for water heating2. Big flow with low pressure drop design suitable for all application.3. Prevent the fouling or scare on the tube surface.4.Full titanium construction produces a high anti-corrosion advantage for swimming pool water, sea water, and other solutions with high chlorine concentration.5. Polish surface has a good feature.6. Compacted design7. Durable material constructed
Nominal Performance Table of of Titanium Pool Heat Exchangers:
Model | Normal Capacity | Pool Capacity | ||
kW | kBtu/Hr | Gallons@1°F/hr | M3@1°C/hr | |
SP-55 | 16 | 55 | 4700 | 32 |
SP-85 | 25 | 85 | 7300 | 49.7 |
SP-155 | 45 | 155 | 13300 | 90.6 |
SP-210 | 60 | 210 | 18000 | 122.6 |
SP-300 | 88 | 300 | 25800 | 175.8 |
SP-360 | 105 | 360 | 31500 | 214.6 |
SP-600 | 175 | 600 | 52500 | 357.7 |
SP-1200 | 352 | 1200 | 105600 | 719 |
SP-2400 | 704 | 2400 | 211200 | 1438 |
SP-3000 | 880 | 3000 | 264000 | 1797.5 |
SP-3600 | 1056 | 3600 | 316800 | 2157 |
SP-4500 | 1310 | 4500 | 396000 | 2700 |
SP-5000 | 1460 | 5000 | 439000 | 3000 |
Note:
1. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;
2. Nominal values are based on 60°C temperature between incoming heating and heated water.
Typical residential application:
In-floor heating
Swimming pools, spas heating
Driveway snowmelts
Typical industrial application:
Oil cooler
Transmission and engine cooler
Boiler sample cooler
Waste water heat recovery
CE Approved Titanium Pool Heat Exchanger
