Detailed Product Description
Features
Attracted to iron or steel surface by magnetic force; only one side of the workpiece needs to be reached.
The test principle and accuracy comply to standard ISO6508 and ASTM E110. Tested by ational Institute of Metrology with tolorance 1.5HRC, equivalent to bench hardness tester.
Quick test, easy operation, good repeatability, high accuracy, no sampling required.
Tests workpieces of any shape and dimension only if there is enough flat or cylindrical surface to fix the tester.
Tests horizontally, slantingly and vertically.
Used to accurately test the hardness of steel plate, steel pipe, shaft, mould, tube, pressure vessel, large workpieces and assembled parts, especially welding line and heat affected zone.
The test surface of PHR-100x is small enough to test the hardness of small machine guide rails.
Used for production inspection and acceptance inspection, replacing Leeb hardness testers with lower precision.
Traceable standard hardness block.
Indenter inspected with standard Rockwell hardness tester.
Test force calibrated with load cells directly traceable to national secondary benchmark.
Application
The test is quick, easy and steady with good repeatability and accuracy. So when the workpiece is available magnetic type hardness tester is the best choice.
Magnetic type superficial Rockwell hardness tester is under development to test smaller, lighter, thinner specimens such as thin plate, thin hard carburized and nitrided steel.
Main Technical Parameters
| Initial Test Force: | 10 kg |
| Rockwelll Test Force: | 60 kg, 100 kg or 150 kg |
| Indenter: | 120°diamond cone |
| 1.588mm carbide ball | |
| Force Applying Method: | by screw |
| Maximum Magnetic Force: | >350kg |
| Test Range : | Rockwell hardness HRC, HRB, HRA etc. 15 scales |
| Resolution: | Rockwell hardness 0.5HR |
| Accuracy: | Meets the requirements of ISO6508 |
| Minimum Specimen Size: | 60×180 mm |
| Net Weight: | 4.9kg |
| Package Gross Weight: | 7.4kg |
Standard Package:
Tester
120°diamond cone indenter
1.588mm carbide ball indenter
3 Rockwell test blocks
V anvil (with adapter screws )
Magnifier
Base for standard test block
Carrying case
Optional:
120°diamond cone indenter
1.588mm, 3.175mm carbide ball indenter
6.35mm, 12.7mm steel ball indenter
Rockwell test blocks (HRA, HRC-High, HRC-Medium, HRC-Low, HRB)
Customized adapter (for testing cylindrical specimen from 50mm to100mm)
Model Selection:
Model | Opening Size | Net Weight | Package Gross Weight | Package Dimensions mm×mm×mm |
PHR-100 | Flat surface 60*180 Cylinder diameter 100 | 4.9 | 10.0 | 480×390×210 |
PHR-100X | Flat surface 20*180 Cylinder diameter 50 | 5.5 | 10.8 | 480×390×210 |
Remarks: Customized adapters are available for testing cylindrical specimens with smaller diameter.
