13*430 jointed ARC air gouging carbon electrode 1) Dimension: As per different requirements. 2) Industrial cutting: metal weld
13*430 jointed ARC air gouging carbon electrode
Carbon gouging rods are used for metal romoval at fast rates with low power consumption. Generally used to remove welding defects, excess welds and foundry risersfrom cast products. Our carbon gouging rods are precisely machined and manufactured in state of the art facilities. We provide pointed, jointed and flat gouging carbon rods.
Jointed carbon gouging rods are machined with male and female ends allowing continuous operation with no wasteage of stub ends. These items can be used in manual and automatic applications with high metal removal rates.
Jointed gouging carbon rods(D.C.) | ||||
Model | Dia. x Length(mm) | Dia. x Length(inches) | Current Range (A) | Application |
B506.5J | 6.5 x 355 | 1/4 x 14′ | 400-500 | Jointed gouging rod have the added benefit of working without stub loss with each rod having male & female parts, can be used with manual and automatic torches. |
B508J | 8 x 355(430) | 5/16 x 14′(17′) | 500-550 | |
B509J | 9 x 355(430) | 23/64 x 14′(17′) | 550-600 | |
B510J | 10 x 355(430)(455)(510) | 3/8 x 14′(17′)(18′)(20′) | 600-650 | |
B511J | 11 x 355(430)(455)(510) | 7/16 x 14′(17′)(18′)(20′) | 650-700 | |
B512J | 12 x 355(430)(455)(510) | 15/32 x 14′(17′)(18′)(20′) | 700-800 | |
B513J | 13 x 355(430)(455)(510) | 1/2 x 14′(17′)(18′)(20′) | 800-1000 | |
B516J | 16 x 355(430)(455)(510) | 5/8 x 14′(17′)18′)(20′) | 1000-1200 | |
B519J | 19 x 355(430)(455)(510) | 3/4 x 14′(17′)(18′)(20′) | 1200-1400 | |
B525J | 25 x 355(430)(455)(510) | 1 x 14′(17′)(18′)(20′) | 1400-1600 | |
Using Instructions:
1. Thel electrodes must keep in dry environment, if it is affected with damp must be drying before use.
2. When using for the direct current, the electrodes link to the anode, and task to the cathode.
3. Keeping steady of working air pressure0.5-0.6Mpa.
4. The arc between electrodes and task is 3mm, the electrodes come out clamp about 100mm.
5. The electrodes and tast must have a angle and dig throw the tangent.
6. Keep aeration during use, operate accord with the work limit.
If you have any interest, please feel free to contact me-- Seliya.
We can provide free samples to you and Different requirements can be ordered.
13*430 jointed ARC air gouging carbon electrode
