Welcome to ECBAY
Classic White Golf Glove
Classic White Golf Glove

Classic white golf glove 1.Fashionable white type 2.Natural deerskin 3.comfort and flexible 4.Competitive price

Classic white golf glove

Deerskin Palm DeerskinBack Deerskin finger Elastic Cuff

About your LOGO we can do

PVC Label and Silicon print

Embroidery

Digital heat transfer

CE standard

EN 388

Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed byfour numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasionBased on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistanceBased on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistanceBased on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistanceBased on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

If some of the results are markt with a X means that this test performance is not tested. If some of the results are markt with a O means that the glove did not pass the test.

Test

Performance level

1

2

3

4

5

Abrasion resistance (cycles)

100

500

2000

8000

Blade cut resistance (factor)

1,2

2,5

5

10

20

Tear resistance (newton)

10

25

50

75

Puncture resistance (newton)

20

60

100

150

EN 420

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc

· The gloves themselves should not impose a risk or cause injury.

· The pH of the gloves should be as close as possible to neutral.

· Leather gloves should have a pH value between 3.5 – 9.5.

· The highest permitted value for chromium is 3 mg/kg (chrome VI).

· Specific details of any substance used in the glove which is known to cause allergies

· Sized by reference to an agreed common European hand size, for example minimum length.

Classic White Golf Glove

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.