Welcome to ECBAY
High-efficiency ST08 two component extruder
High-efficiency ST08 two component extruder

Pump of A and B component all adopt pneumatic system driver

Pump of A and B component all adopt pneumatic system driver , reversing is nimble and reliable ,the efficiency is much more improved . Optimize the pipeline, increase the main motor power, to make the discharging more rapid and fluent. Automatic spring cantilever ,to make the operate more save both time and labor .The curing agent system, is fully enclosed system, to eliminate the air enter into , avoid the contact of the  air and curing agent (to the silicone glue curing agent), improve the mixing effect. At the same time, this system passed four filtering , ensure the curing agent clean and the stability of system, extend the  life of pump body.The high pressure valve port of base material pump and the curing agent pump and the proportioning pump all adopt zero leak special alloy grinding manufacturing, there is a simple and easy adjustable ratio institutions in the proportioning pump, it can ensure the almost harsh matching requirements of the two component glue to meet the proportion of glass curtain wall and insulating glass .The mixing system adopt internationally popular mixer , equipped attached the unilateralism pin valve with special structure to make the mix uniformitive.

Mixing ratio


A drum

55 gallons

B drum

5 gallons

Max.air consumption

0.8 M³


35 Mpa

Sealant output


Air pressure


Overall dimension


Total weight


High-efficiency ST08 two component extruder

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.