Glass cutting machine 1 protected with safty guards. 2 cheap to the cost 3 power-saving
glass cutting machine MF-F2436-4TL
SPECIFICATIONS
I. Technical Performance
The performance of the product described in the following text conforms to that made of the high-quality float glass specified by national standards in GB11614-1999 Float Glass.
Note: (1) The thickness of glass should be ≥2.85MM
(2) Four-side edges of the glass should be ground by diamond wheel until being beveled. No hole or chamfers are allowed.
1. Maximum area of glass sheets array: 2.85MM - 19MM 2000MM × 4000MM
2. Minimum size of glass for processing: 100MM × 250MM or φ250MM
3. Maximum size of individual glass sheet for processing:
2.85 MM 600MM× 1000MM
3 MM 800MM× 1200MM
4-6MM 2000MM× 4000MM
8-19 MM 2000MM × 4000MM
Clearance of glass sheets array: longitudinal ≥50mm; transverse ≥20mm
4. Thickness of glass for processing: 2.85 - 19 mm
5. Maximum area of glass for processing: 8 square meter per tempering cycle
8 square meter per glass sheet
II. Main Technical Parameters
1. Equipment External Dimension: 18075mm(L)×6950mm(W)×3500mm(H) (the fanning mill is set after the machine)
2. Installed Capacity:
Power Supply: Three-phase 380V; Five-wire 50 Hz
Gross Power: 870KW
Picture
1 equipment of part:
2 equipment of part:
3 sample:
High quality MF-F2436-4TL Glass cutting machine
