Inspector M is a servo driven rotary inspection machine, that allows handling of up to 200 containers per minute.
3.1. Inspection Machine
Ÿ Standard inspection:
Mechanical plug and ring gauging
Dip saddle, and height gauging
8 channels of modulated check inspection.- with 2 rotate stations
Mould number reading (Heel dot code)
Out of round
Ÿ Defect detected:
Inspect M is designed to detect following defects:
Choked neck
Oversized ring
Finish, neck, shoulder, body, heel, and base checks
Finished deformities- dip and saddle finish
Over max and under min height
Out of round container
Ÿ Power requirements: 800/400/415 VAC, 3-Phase
Ÿ Air requirements:
Min.: 3.5 Bar(%) PSI
Max:7 Bar(100PSI)
Max Consumption:0.8-0.85 M3/Min [20-30cf,]
Ÿ Temperature specification:
Maximum(without cooling): 40°C [104.F]
Maximum(without cooling): 50°C [122.F]
Minimum: 1°C [34.F]
Relative humidity: 95%(non-condensing)
Ÿ Machine speed
Maximum: 200bpm
Minimum: 60bpm
Speed in effected by container dimensions, shape, star wheel configuration, and plug penetration
Ÿ Demension
Length: 2834mm
Width: 1162mm
Height: 2095mm-2695mm( For a conveyor height between 900mm and 1500mm)
Inspector
