5kW Vertical Wind Turbine Controller 1-.Low Voltage Charging 2-RS232/485 or Ethernetor GPRS Communication 3LCD display
5kW Vertical Wind Turbine Controller
MAIN FEATURES
1- Perfect protection and alarming function, thus the system has a high stability
2- LCD display function, visually display all operation parameters
3- Voltage-limiting and current-limiting charging mode, ensures battery in the best charging status
4- PWM stepless unloading mode, which burn the excess power in dump load, making the battery charging in the best status
5- A multiple communication interface selection, realising PC monitoring function. The standard mode is RS232 communication, and other optional model RS485 / Ethernet/GPRS etc
6- Optional wind turbine low-voltage charge function, making full use of low wind power
7- Optional multiple control system function, real-time monitoring the multiple control system at the same time, with well-organized and exact monitoring interface
8- European CE certification
TECHNICAL PARAMETERS
Model | WWS50A-120 | WWS50A-220 | WWS50A-240 |
Rated Wind Turbine Power | 5kW | ||
Rated Solar Power | 1.5kW | ||
PV Charge Current | 10A | 5A | 5A |
Rated Battery Voltage | 120V | 220V | 240V |
Wind Turbine Maximum Input Current | 70A | 35A | 35A |
Wind Turbine Maximum Input Power | 8kW | ||
Unload Voltage(factory default) | 140V | 252 V | 280 V |
Unload Current(factory default) | 25A | ||
Control Mode | PWM | ||
Display Mode | LCD | ||
Display Parameters | Wind Turbine Power,Wind Turbine Voltage,Wind Turbine Current, PV Voltage,PV Charge Current,PV Power,Battery Voltage.Etc | ||
Working Temperature & Humidity | -20~+55°C/35~85%RH(Without Condensation) | ||
Protection Function | Solar reverse-charging protection , solar reverse-connection protection, battery over charge protection,battery over-discharge protection, battery reverse-connection protection, lightning protecting, wind turbine current limitting, wind turbine automatic brake and manual brake. | ||
Optional Function | Optional Function 1 : RS Communication and Matched Software . Install the matched software to computer and connect controller with Computer Via software . User can adjust parameters from software by themselves . User can know the state of whole system Via sofware . All datas will be stocked into excel files from software . Optional Function 2: Low Voltage Charge Function . With this funtiopn ,Controller can start charging battery when wind turbine voltage is lower than battery bank voltage . For example . Controller can start charging battery from 2V if runs in 12V battery bank .And can start charging battery bank from 4V if runs in 24V battery bank | ||
5kW Vertical Wind Turbine Controller
