* New Design Tabletop Pulse Oximeter * 2 Parameters: SPO2 and Pulse Rate * Suitable for Adult, Pediatric, and Neonate Patients
PR-2T Tabletop Pulse Oximeter
This Pulse Oximeter could be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment. It is suitable for Adult, Pediatric, Infant(Neonatal).
Technical Features:
1. Compact, Small, Light, Easy for Carrying and Handling;
2. LED Display of Measurement and LCD Display of PLETH;
3. Audio and Visual Alarm;
4. Storage and Review of Patient’s Trend Data Up to 36 Hours Which is Never Lost Even when Power’s Off;
5. Three Kinds of Power Supply, AC Power, Build-in Rechargeable Ni/MH Battery and Common AA Alkaline or Rechargeable Batteries;
6. Battery Capacity Indicator;
7. Automatic Power-off;
8. Patient’s Trend Can be Transmitted to a Personal Computer for Display,Saving and Printing;
9. Suitable for Adult, Pediatric, and Neonate Patients.
Standard Configuration:
* Tabletop Pulse Oximeter Main Unit 1Pc
* Adult Finger SpO2 Sensor 1Pc
* AC Power Adaptor 1Pc
* Communication Cable 1Pc
* The Operator’s Manual 1Pc
* Surface TEMP Probe (Optional)
* Pediatric Finger/Toe SpO2 Sensor (Optional)
Technical Specification:
1.General
Monitoring Parameters: SpO2,PR,PLETH,Pulse strength,TEMP(Optional)
Signal sockets:SpO2 socket,PR socket,TEMP socket(Optional),adaptor socket,PC communication socket
Display screen:
Type: 128×64 dot matrix homochromy LCD and Dual-color LED (red/green)
LCD Display area: 46mm×32mm
LED Display area: 35mm×58mm
Backlight color: White
LED: Dual-color LED (red/green) and homochromy LED
2. Features
PLETH: The monitor can display PLETH waveform
Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement flashes on the screen.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.
Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours.
Data storage: The saved data will never be lost even if the monitor is powered off.
Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing.
3. Electrical Specifications
Working Voltage: DC 6.0V~9.0V
AC power adaptor
Input: AC 100~240V, 50/60Hz, 0.7A
Output: DC 5V,3A
Internal battery
Type: 1.5Ahr/8.4V Li Rechargeable Battery
Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25°C)
Recharge time: 5 hours
Common 1.5V Battery
Type: Five pieces of common 1.5V AA battery or rechargeable battery
Run Time: More than 5-hour continuous operation with a new battery (environment temperature is 25°C)
4. Environment
Temperature
Operation:0°C ~ 45 °C
Transportation and storage:-20 °C ~ 60 °C
Humidity
Operation:15% ~95 %(non-condensing)
Transportation and storage:10% ~ 95 % (non-condensing)
Altitude
Operation:86KPa~106KPa
Transportation and storage:50KPa~106KPa
5. Parameter Specifications
SpO2:
Patient: Adult, Child and Neonate
Range:35%~100%
Resolution:1 %
Accuracy:±2 %(70% ~100%), Unspecified (0%~ 69%)
PR :
Range:30 bpm~250bpm
Resolution:1bpm
Accuracy:±2bpm
TEMP(Optional):
Channel:1
Input: Body surface thermal-sensitive resistor temperature sensor
Range: 0°C~50°C
Resolution:0.1°C
Accuracy ±0.2°C
New Design PR-2T Tabletop Pulse Oximeter
