Dongguan Fu Tejia Filter Manufacturing Co., Ltd. [China]

Oil filter Application:for engine High filtration efficiency Economic small flow resistance and long service lifetime

 Oil filter LF3528 features:

1)Application: for engine & vehicle

2)Ref. No.: LF3528 

3)Out size:  102(H)*90(OD)mm 

4)Long service lifetime

5)High quality 

6)Reliabilty and durability.

Oil filter LF3528 instruction:

Brief-introduction of oil filter

The oil filters are designed to get rid of the impurities to prevent the engine, such as the dust, mental partical, carbide sediment, sooty partical and so on. During the engine operation, the mental pratical, dust, oxygenated carbide sediment and gelatinous precipitate, water will mix in the lube. The oil filter aims to filter the impurities in the engine system, keeping the lube clean, extending the operation life. It has high filter ability, small flow resistance and long service lifetime.

The technique for oil filter

1. Filter element

The request of filter element for oil filter will more strict than air filter, since the oil temperature is range from 0 to 300 centigrade. Under the drastic temperature change condition, the oil concentration will be changed as well, which will affect the filter flow. We provide high quality oil filter element, which could filter the impurity in drastic temperature change condition to insure the enough flow.

2. Rubber seal

We provide the high quality rubber seal which synthesis by special rubber, make sure it has good quality with oil tight.

3. Safety valve

   As the engine flameout, it will prevent the oil filter getting dry; as the engine starting again, it will come into pressure immediately.

4. Relief valve

Only provide in good quality filters. It only work under the certain condition to let the unfiltered oil flow into engine directly. For example the outside temperature fall of certain one or the oil filter beyond the working deadline. Even though it will take some impurities into engine as well, it is smaller damage for the lost of the empty oil. The relief valve is the key point to prevent engine in an emergency situation.

The installment and replacement frequency

1,The process of installment:1) draining or sucking the old oil; 2) loosen the fastening bolt; taking the used oil filter off;3)Pouring the new lube in the new filter, putting the oil on the rubber seal of new filter; 4) installing the new filter and fasten the bolt.

2.The advice for Replacement frequency: 250 hours (5000 km) or half a year.

Oil filter LF3528 characteristics :

Oil filter LF3528