1)color:black,brown 2)glue:WBP,MR 3)core:poplar,birch,hardwood 4)size:1220*2440mm building board
The advantages are as follows:
1. Big Size: The biggest size is 2440x1220,915x1830mm, which could decrease the number of the joint and increase the working efficiency.The planking will not deform and crack,can resist water well and turn many times which demoulds easily, about 1/7 of steel planking.
2. Light Weight: It's more suitable for high-rise building and bridge construction.
3. Re-use many times: It can be used for many times if stocked correctly
4. Concrete building: It can keep the surface smooth and beautiful when used for pouring, and you don't need to plaster the wall for second timem, for it can decorate directly that can decrease the construction period 30%.
5. Corrosion resistance:It will not pollute the surface of the concrete.
6. Good thermal insulation : It is good for construction in Winter that it can be used as template for curved surface.
7. Good construction performance: It is better rhan bamboo plywood and small steel plywood in terms of nailing, sawing and drilling, It can be processed to template with all shapes according to needs.
Technical Specification: 18mm full poplar film faced plywood
No. | Property | Unit | Test Method | Value of Test | Result | |
1 | Moisture content | % | EN 322 | 6-12 | Check out | |
2 | Density | Kg/m3 | EN323 | 530 | Check out | |
3 | Bonding quality | Bonding quality | Mpa | EN314 | Max: 1.40 Min: 0.75 | Check out |
Damage rate | % | 54% | ||||
4 | Bending Modules of Elasticty | Longitudinal | Mpa | EN310 | 4180 | Check out |
Lateral | 4578 | |||||
5 | Bending Strength N/mm | Longitudinal | Mpa | 40.25 | Check out | |
CONSERVE AND MAINTAIN:HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOODSTORAGEAlways clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.
SEALING OF EDGESPhenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealeedges as soon as possible with water proof paint.
SEALING OF HOLESAny holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If waterdoes enter it may cause swelling around the holes.
CLEANING AND REPAIRTo obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp
metal scraper to dislodge hardened concrete
18mm black cheap waterproof building board
