Hydraulic T/M ,With Japanese Kubota V2403 Diesel Engine ,Two Stages Lifting Height Tower Is 3M Mast, LF1070mm,Pneumaic Tyre
Configuration:
Hydraulic T/M ,With Japanese Kubota V2403 Diesel Engine ,Two Stages Lifting Height Tower Is 3M Mast, LF1070mm,Pneumaic Tyre ,SeatBelt ,Engish Nameplate
Detailed specification:
Model |
| CPCD35 | |||
Load Capaciry | kg | 3500 | |||
Load Center | mm | 500 | |||
Mast Lifting Height | mm | 3000 | |||
Free Lift | mm | 240 | |||
Tillifing Angles (Front/Rear ) |
| 6°/12° | |||
Speed | Max Driving Speed | With Load | km/h | 19.5 | |
Without Load | km/h | 20 | |||
Go up | With Load | mm/s | 500 | ||
Without Load | mm/s | 530 | |||
Drop | With Load | mm/s | 550 | ||
Without Load | mm/s | 540 | |||
Max Drawbar Pulll (With Load/Without Load ) | kg | 1530/876 | |||
Max Gradeability (With Load/Without Load ) | %(fan) | 20 | |||
Min. Turning Radius | mm | 2420 | |||
Exterior Size | Overhead Length | without fork | mm | 2745 | |
with fork | mm | 4227 | |||
Overhead Width | Outboard | mm | 1225 | ||
Frame | mm | 1150 | |||
Height | Mast drop | mm | 2065 | ||
Front-wheel Overhead | mm | 2070 | |||
Max. lift | mm | 4240 | |||
Tire | Specs | Fornt |
| 28x9-15-12PR | |
Back |
| 6.50-10-10PR | |||
Wheelbase | mm | 1700 | |||
Tread | Fornt | mm | 1000 | ||
Back | mm | 970 | |||
Turning Radius | Low-water mark(mast) | mm | 110 | ||
Frame | mm | 115 | |||
Overhang (front) | mm | 498 | |||
Overhang (back) | mm | 495 | |||
Min intersecting aisle | mm | 2120 | |||
Engine | Model |
| KUBOTA V2403 | ||
Rated Output | kw/rpm | 36.5/2600 | |||
Rating Torque | N.m/rpm | 158.6/1600 | |||
Number or Cylinder |
| 4 | |||
Inside cab seat height | mm | 1005 | |||
Height | kg | 4790 | |||
Fork Size(L*W*T) | mm | 1070X130X45 | |||
CPCD35 Diesel Engine Forklift Truck
