Wafer electromagnetic flow meter Installation modes: Wafer integrated type Aperture: DN40~DN200
Wafer electromagnetic flow meter
Installation modes: Wafer integrated type
Language selection: Chinese and English
Aperture: DN40~DN200
Electrode material: 316, Hb, Hc, Ti, Ta
Inside lining material: PFA, F46
Medium: conducting liquid (include solid liquid two-phase body)
Accuracy grade: 0.2%, 0.5%, 1.0% (DN10~DN200)
Medium conductivity:>5μS/cm (water > 20μs/cm)
Excitation mode: LF square wave excitation, HF square wave excitation (apply to serosity measurement)
Flow velocity scope: 0.1~15m/s (flow unit selectable)
Connection flange: GB/T9119-2000
Medium temperature: -10~+60°C,
Rated pressure: 1.0Mpa~4.0Mpa (divided according to aperture, refer to type spectrum table
Protection grade: IP67
Output signal: 4~20mA output, frequency/pulse, alarm
Hollow tube measurement: measuring hollow tube function without electrodes, continuous measurements, fix value alarm
Record function: record of power-fail time, automatic record of power break time of instrument system, make up flow left out (for option)
Infrared remote control: infrared hand-hold operational keyboard (for option)
Application: Acid, alkali, water supply and drainage, food, paper pulp, ore pulp etc.
Display: Flow rate, flow, percentage, integrating flow, fault alarm etc.
Supply power: 220V AC, 24V DC
Mark of explosion proof: Exd ΙΙ CT6 (for option)
Wafer electromagnetic flow meter
