Gear Flowmeter, Turbine Flowmeter, Digital Flowmeter, Oil Flowmeter used widely in oil, food industry, Size: 3/4"-3"
LC Gear Flowmeter Meter
LC gear flowmeter are widely used in flow measurement in the industrial field such as petroleum exploitation, oil refinery, chemical and oil storage.
Mode | LC-15 | LC-20 | LC-25 | LC-40 | LC-50 | LC-80 | LC-100 |
DN (mm) | 15 | 20 | 25 | 40 | 50 | 80 | 100 |
Min. Flow Rate m3/h | 0.3 | 0.3 | 0.6 | 1.6 | 5 | 6 | 10 |
Max. Flow Rate m3/h | 1.6 | 3 | 6 | 16 | 25 | 50 | 80 |
Accuracy % | +-0.3~+-0.5 | ||||||
Working Temperature oC | -10~80 | ||||||
Pressure MPa | 1.0-6.3 | ||||||
Liquid Viscosity MPa.s | 2~75 | ||||||
Min. Scale Value L | 0.1 | 1 | 10 | ||||
Register Amount m3 | 999.99 | 9999.9 | 99999 |
Electric Turbine flow meter
digital turbine flowmeters are best suited for petroleum based products. The modular design allows for maximum flexibility in meeting customer’s applications. Models are available with NPT/BSP or flange fittings.
Features:
High precision, durable and compact turbine flowmeters.
Modular design allows for use with Output Modules, Sensors and Remote Transmitters.
Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate.
Internal parts are simple to replace for easy maintenance.
Lightweight, compact design allows for easy installation.
Powered by Lithium batteries for approximately 9,000 hours.
Specification:
Fitting Type: | NPT or ISO (Female) | ||
Housing Material: | Aluminum | ||
Meter Sizes Available: | 3/4” 1” 1-1/2” | ||
Flow Range: | 3/4” | 2 - 20 GPM (7.6 - 75.7 LPM) | |
1” | 5 - 50 GPM (18.9 - 190 LPM) | ||
1-1/2” | 10 - 100 GPM (38.0 - 380 LPM) | ||
Accuracy (% of Reading): | Turbine Only | Turbine w/Computer | |
3/4” | ± 1.5% | ± 1.0% | |
1” | ± 1.5% | ± 1.0% | |
1-1/2” | ± 1.0% | ± 0.75% | |
Repeatability: | ± 0.1% | ||
Pressure Rating: | 300 PSI / 21 BAR | ||
Operating Temperature Range: | -40°F to +250°F (-40°C to +121°C) | ||
Typical K-Factor: | 3/4” | 1,100 | |
1” | 565 | ||
1-1/2” | 215 | ||
Wetted Materials: | Housing: | Aluminum | |
Bearings: | Ceramic | ||
Shaft: | Tungsten Carbide | ||
Rotor: | PVDF | ||
Rings: | 316 Stainless Steel | ||
Frequency Range: | 3/4” | 37 - 370 Hz @ 2 - 20 GPM | |
1” | 47 - 470 Hz @ 5 - 50 GPM | ||
1-1/2” | 36 - 360 Hz @ 10 - 100 GPM | ||
Recommended Strainer Size: | 3/4” | 55 mesh | |
1” | 28 mesh | ||
1-1/2” | 55 mesh | ||
Maximum Flow: | 3/4” | 30 GPM (113.6 LPM) | |
1” | 75 GPM (284 LPM) | ||
1-1/2” | 150 GPM (568 LPM) |
Oval Gear Flow Meter