fiberglass Spray up roving 1.TEX2400 2.easily chopped 3.good distribution 4.Best composite performance 5.factory
Spray up roving is compatible with unsaturated polyester resins,vinyl ester resin and epoxy resin,it is used for spray up and centrifugal casting,ect.,mainly used for producing GRP ships,sanitary ware,storage tanks and Hobas pipes,etc.
E-Glass Multiend Roving for Spray Up/HOBAS Pipe
1.TEX24002.easily chopped3.good distribution4.Best composite performance5.factory
Products Application
Products Feature and Advantages
Excellent Process:Good anti-static performance,low fuzz,suitable stiffness to assure the products with well chopped performance,excellent distribution and flat lying down.
Good wet-out:Suitable wet out speed,easy to delete bubbles,well compatible with resins,excellent performance when spray up on the perpendicular side.
Key Technical Data
Specs Tech Data Data | TEX | Lol (%) | Mol (%) | Compatible Resin | Application Process |
y701 | 2400 | 1.10-1.30 | ≤0.10 | UP VE EP | Applicable Process |
y703 | 2400 | 0.95-1.15 | ≤0.10 | UP VE EP | Spray up / Hobas |
Each bobbin is 15-17 kg and wrapped by a PVC shrink bag.If required,each bobbin could be packed into a suitable cardboard box.
Each pallet containers 3 or 4 layers,and each layer contains 16 bobbins(4*4).Each 20ft container normally loads 10 small pallets (3 layers) and 10 bigs pallets (4layers).The bobbins in the pallet could be singly piled or be connected as start to end by air spliced or by manual knots;
The whole pallets of bobbins are wrapped with cardboard boxes,packed on the pallet with packing straps and shrink film or with multi-layers of shrink film only.
Storage
This product should be stocked in dry and cool places.The best condition is with temperature between 15 and 35,with a relative humidity between 30%-70%.Please keep the product in its original packing before use,avoiding moisture.
fiberglass Spray up roving
