FTTH 2.3kg5.7inch LCD 8s splicing25s Heat-Shrinking X/Y axes display 304times Electrode 7800times Battery220splicing&heating
Applicated for FTTH project.
Suitable for: Fiber, Cable, Covered wire and Jump splicering.
Main Features:
1) FTTH is environment, can be used in normal optical fiber engineering2) Accurate fiber core alignment, guarantee in the low loss3) Small volume, light weight, including the battery only 2.8 kg4) 8 seconds welding, heat shrinkable 30 seconds5) X/the Y axis shows at the same time, magnified 304 times6) Can be set to close wind cover automatically start welding, closed heating cover heat shrinkable start automatically7) Real-time discharge correction, do not need to adjust the parameters8) Electrode life is long, discharge is as high as 40009) USB and VGA port10) 5.7 inch high-definition digital display on the LCD panel11) Built-in super capacity of lithium battery, can be completed in 220 times and heating12)Real-time accurate says the battery surplus.
Typical Application:
AV6471 Fiber Splicer mainly applied to fiber cable construction, fiber line maintenance, rush repair fiber cable and fiber device produce test.
Typical application for AV6471A Fiber Splicer
AV6471 Fiber Splicer mainly applied to fiber cable construction, fiber line maintenance, rush repair fiber cable and fiber device produce test.
Technical Parameter:
Applicable Fiber | SMF(ITU-T G. 652), MMF(ITU-T G. 651), DSF(ITU-T G. 653), NZDSF |
Average Splicing Loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) |
Return Loss | < -60dB |
Operation Mode | Auto, Half auto, Manual |
Align Mode | Advanced PAS align mode. |
Fiber Diameter | clad diameter: 80µ m∼ 150µ m, coating diameter: 100µ m∼ 1000µ m |
Cleave Length | 8~16mm(coating diameter< 250µ m), 16mm(coating diameter 250∼ 1000µ m) |
Magnification | Vertical 152times, horizontal 304times. |
Image Display | 5.7´ 640× 480 LCD. |
Pull Test | Standard 2N(optional). |
Pyrocondensation Tube | 40mm, 60mm and a series of micro Heat-Shrinkable Tubing. |
Battery Capacity | Typically splice 220 times, charging for 3.5 hour(available when charge). |
Battery Lifetime | Cycle life up to 300∼ 500 times, replaceable. |
Electrode Lifetime | > 4000 times, replaceable |
Lighting for Construction | Built-in super High-brightness LED supply convenient for night work |
Ports | USB, VGA |
Power Supply | Built in 11.1V Lithium Ion Battery. AC adopter(input AC100∼ 240, output DC13.5V/4.5A) |
Environment Adaptation | Temperature range: -10º C∼ 50º C; Humidity: 95%RH(40º C), no condensing); Altitude: 0∼ 5000m |
Size | L× W× H=160× 150× 140(mm) |
Weight | 2.3kg(no battery ), 2.8kg (including battery) |
Indent Information:
Main body: AV6471A FTTH Fiber Splicer
Standard equipment
Key | Description | QTY |
1 | AV6471A FTTH Fiber Splicer | 1 |
2 | AC power adpoter | 1 |
3 | AC current cable | 1 |
4 | Standby electrode | 1 |
5 | Blower brush | 1 |
6 | Bottle with siphon | 1 |
7 | Fiber bracket | 1 |
8 | User’s manual | 1 |
9 | Luxury tote kit | 1 |
Optional equipment:
Key | Description | Remark |
1 | Fiber Cleaver | AV33012 |
2 | Li-Ion battery | 11.1/10AH |
3 | Tool kit | / |
Summary: The fiber fusion splicer(AV6471A )is FTTH fiber splicing machines is a new design of the optical fiber in equipment. In the light of the special FTTH environment.In fiber application: This fiber fusion splicer light body and the fine design in the even if narrow work environment also can ease; Our this fiber fusion splicer has Novel light, and the fiber fusion splicer can provide fine imaging system and pure digital design makes the image display is more exquisite, clear. The embedded real-time operating system provides the friendly interface and more rich function; The built-in super capacity for long time high performance of lithium battery field work provides reliably.Temperature, humidity and pressure real-time compensation system has greatly improved the equipment adapt to bad environmental change ability, for in different get low loss in the environment of the consistency of the provide a guarantee.
JIAXUN Optical FTTH Fusion Splicer -- JX9010F
